Product Description
Nissan Maxima 1995-1996 Full Length Upper Kit TH95541, 3.5", 12 Pieces
TH95541 is a twelve-piece polished stainless steel Upper Kit for the 1995-1996 Nissan Maxima 4-door sedan. The bullet reads "3.5" Width, Full Length, Includes coverage from the Wheel Wells to the Bumper Front and Rear," and the pieces span "from the bottom of the molding DOWN to the specified width."
Bumper to bumper, 3.5" deep
This kit runs a slim band under the molding along the doors and, per its note, out from the wheel wells to the bumper at each end. It's the longest of the three Maxima kits, and the narrowest in height along with its eight-piece partner.
Eight or twelve pieces
TH95542 is also a 3.5" Upper Kit for this sedan, with eight pieces and no length note. The record doesn't say exactly where TH95542 stops; this listing's note is the one that states coverage to the bumpers. If you're choosing between them, compare their photos or call 877-752-3811.
Full Kit alternative
TH95540 is the Maxima Full Kit, eight pieces at 8.5", running from the molding all the way to the door bottom.
Material
The full-length 1995-1996 Maxima kit is twelve 3.5" pieces cut in the USA from polished 26 gauge 304 stainless, carried wheel well to bumper on 3M automotive-grade acrylic foam tape. Per QAA, that tape will hold for a lifetime with no harm to the Nissan.
Twelve pieces to place
- Lay the Maxima pieces on a soft towel, a few at a time
- Order them front bumper to rear bumper using the photos
- Write side and position on each liner
- Set aside anything you can't place, and call us
Checking the line
Run masking tape 3.5" below the molding from the front bumper to the rear. Look at it near the wheel wells and the bumpers in particular.
Molding the whole way
A narrow strip shows every wave in the molding. Check it's straight and secure along the full length, including beyond the doors, and repair any lifting section first.
Cleaning
Wash and rinse from bumper to bumper, strip wax with a wax-and-grease remover, clean carefully at the wheel well edges, and wipe with isopropyl alcohol just before fitting.
Fitting order
Dry fit the door pieces first so the door gaps are right, then work outward to each bumper. Open all four doors. Bond with short liner peels and firm pressure.
Maxima pieces toward the rear
Keep the Maxima gaps even at every joint.
Time and weather
A long kit takes time. Start early on a mild, dry day in shade, and leave it a day before washing.
Gaps at the ends
Where a piece meets the bumper or rounds toward a wheel well, check the edge sits flat before bonding. A piece that won't lie flush there is a reason to stop and call rather than force it.
Count all twelve pieces as soon as the box arrives, and call us if one is missing.
With your year in hand, dial 877-752-3811 about Maxima kit TH95541 (UPC 691821345113).
TH95541 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH95541 |
| UPC | 691821345113 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 3.5" |
| Coverage / notes | Full Length, Includes coverage from the Wheel Wells to the Bumper Front and Rear; Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1995-1996 Nissan Maxima |
Fitment: TH95541
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Maxima | 1995-1996 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1995-1996 Nissan Maxima
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 12 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH95541 Rocker Panel Trim, Upper Kit
Which Maxima does TH95541 fit?
The 1995-1996 Nissan Maxima 4-door sedan.
How far does it reach?
From the wheel wells to the bumper, front and rear, per the note.
How wide is it?
3.5", from the bottom of the molding down.
How many pieces?
Twelve.
