Product Description
Acura Integra 1990-1993 Coupe Upper Rocker Kit TH90970, 5", 6 Pieces
TH90970 is a six-piece polished stainless steel Upper Kit for the 1990-1993 Acura Integra 2-door coupe. It "Spans from the bottom of the molding DOWN to the specified width," and the listed width is 5".
Coupe and sedan kits
QAA links one other Integra listing, for the sedan:
- TH90970: coupe, Upper Kit, 5", 6 pieces (this kit)
- TH90975: 4-door sedan, Upper Kit, 4.75", 8 pieces
Both are Upper Kits working down from the molding, but the widths and counts differ, so order by body style. A coupe owner shouldn't pick the sedan kit to get a slightly narrower band.
Placing the 5" line
The top edge sits against the lower edge of the molding; the bottom edge is 5" below. Mark that line on each door with masking tape before ordering and look at it from a few steps away. If it reaches the door bottom anywhere, call 877-752-3811 with a photo.
No length note
The record doesn't say whether the coverage stops at the wheel wells or runs further. The photos show the layout.
Construction
QAA cuts the pieces from high-quality polished 26 gauge 304 stainless steel and makes them in the USA. They install over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Getting ready
Check that the molding is in place and firm along both doors. Wash the band under it, strip wax and polish with a wax-and-grease remover, and repair any chipped or rusty spots. Finish with an isopropyl alcohol wipe just before the pieces go on.
Six pieces
The record doesn't list positions for the six Integra pieces, so sort them by size, dry-fit each one, and label every liner with its spot.
Dry fit
Tape each piece up with its top edge tucked under the molding. Open and close the doors, then sight along the side to check the bottom edge is straight.
Bonding
Peel a little liner at a time, press, and continue. Go back over each piece with firm pressure.
Matching
Keep all the Integra gaps equal.
Conditions
Shade, dry air and mild weather; wash the Integra a day later.
Ordering
Confirm the coupe and the year. Keep the box and liners until you're done.
If the molding is damaged
Every piece lines up with the molding along its top edge, so a cracked, loose or missing section leaves nothing to work to. Repair it before ordering, or call us to talk it through. A photo of each side helps.
One door at a time
Fit one door completely and look along the side from the front and rear before moving on. It is much easier to adjust a piece before the liner comes off than after.
Photograph the Integra before you start so you can compare afterward.
Keep every liner on until both doors have been dry fitted and the line looks even.
Six-piece Integra set TH90970, UPC 691821610310: Quality Automotive Trims, 877-752-3811.
TH90970 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH90970 |
| UPC | 691821610310 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5" |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1993 Acura Integra |
Fitment: TH90970
| Vehicle | Years | Body style |
|---|---|---|
| Acura Integra | 1990-1993 | 2-door, Coupe |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1990-1993 Acura Integra
- TH90975: 8-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH90970 Rocker Panel Trim, Upper Kit
Which Integra does TH90970 fit?
The 1990-1993 Acura Integra 2-door coupe.
Where does it install?
From the bottom of the molding down 5".
Is there a sedan kit?
Yes, TH90975, an 8-piece Upper Kit at 4.75".
How many pieces?
Six.
