Product Description
TH90975 Acura Integra 1990-1993 Sedan Upper Rocker Kit, 4.75", 8 Pieces
TH90975 is an eight-piece polished stainless steel Upper Kit for the 1990-1993 Acura Integra 4-door sedan. It "Spans from the bottom of the molding DOWN to the specified width," and the record lists that width as 4.75".
Sedan, not coupe
The linked coupe kit, TH90970, is a six-piece Upper Kit at 5". This sedan kit has two more pieces and a band a quarter-inch narrower. Since the two are tagged for different bodies, choose the one that matches your door count rather than the width you prefer.
Where it ends up
Each piece's top edge sits against the lower edge of the molding. The bottom edge lands 4.75" lower. To see that before ordering, run masking tape at 4.75" below the molding on all four doors and step back from the car. If the tape line passes the door bottom at any point, send us a photo at 877-752-3811.
Length
The record has no note saying whether the eight pieces stop at the wheel wells or run past them. Use the photos to see the layout, or ask us.
What you get
For Acura's four-door Integra of 1990-1993, QAA shapes eight strips 4.75" wide in the USA from polished 26 gauge 304 stainless; 3M automotive-grade acrylic foam tape holds them below the molding. QAA says the tape will hold for a lifetime and won't mark the car.
Molding first
Because every piece works from the molding down, the molding has to be straight and firmly attached on all four doors. If it's cracked, lifting or missing anywhere, repair it before you fit the trim.
Clean surface
- Wash and rinse the band under the molding.
- Use wax-and-grease remover to take off wax and polish.
- Fix any chips or rust and let touch-up cure.
- Wipe the Integra with isopropyl alcohol just as the pieces go on.
Sorting eight pieces
The record doesn't list positions. Lay the pieces out front to back, compare them with the photos, and write the position on each liner.
Trial fit
Tape each piece in place with painter's tape, top edge snug under the molding. Open all four doors and check the ends at each door gap.
Bonding
Peel a short length of liner, press, and keep going to the end of the piece. Finish with firm pressure along its length.
The rest of the Integra kit
Measure the gaps on the side you've finished and copy them on the other.
When to work
A dry, mild day in shade, with the panels warm. Leave the car unwashed for a day.
Ordering
Confirm the sedan and give us the year. Keep the box and liners until every piece is on and the line looks right.
If a door has been replaced
If a door on your car has been replaced or its molding refitted, check the 4.75" line on that door on its own. Measure each door separately and send us the readings if one stands out.
Fit a single Integra door first and look at it from a few paces back.
Eight pieces make up Integra set TH90975 (UPC 691821333875); phone 877-752-3811 with questions.
TH90975 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH90975 |
| UPC | 691821333875 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.75" |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1993 Acura Integra |
Fitment: TH90975
| Vehicle | Years | Body style |
|---|---|---|
| Acura Integra | 1990-1993 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1990-1993 Acura Integra
- TH90970: 6-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH90975 Rocker Panel Trim, Upper Kit
Which Integra does TH90975 fit?
The 1990-1993 Acura Integra 4-door sedan.
Where does it install?
From the bottom of the molding down 4.75".
Can I use it on the coupe?
It's tagged for the sedan. The coupe kit is TH90970.
How many pieces?
Eight.
