Product Description
TH90704 Mazda Protégé 1990-1993 4-Door Upper Rocker Kit, 4", 8 Pieces
TH90704 is an eight-piece polished stainless steel Upper Kit for the 1990-1993 Mazda Protégé, listed with the tag "4-door, Compact Car." It "Spans from the bottom of the molding DOWN to the specified width," and the width is 4".
Is this your car?
The fitment runs 1990-1993 and names the 4-door. QAA's 2-door listing for this model has its own record, with a hatchback body tag and a different year range; it isn't linked here. If you're not certain which you have, read us the model name, year and door count, and we'll check it at 877-752-3811.
A 4" band under the molding
The trim begins at the molding's lower edge and ends 4" below it. That's a fairly slim band, and it leaves the area between its lower edge and the door bottom as it is. To see it before you buy, stick masking tape 4" below the molding on each door and step back.
Eight pieces
The record gives no length note and no positions. It doesn't say whether the eight pieces stop at the wheel wells or continue. Use the photos as your guide, and label each liner before you peel anything.
What the pieces are
The 1990-1993 Protégé sedan gets eight 4" strips that QAA forms in the USA out of polished 26 gauge 304 stainless, carried under the molding on 3M automotive-grade acrylic foam tape. Per QAA, that tape will hold for a lifetime and won't mark the Mazda.
Before install day
- Check the molding is straight and secure on all four doors
- Repair chips, rust or flaking paint in the band you'll cover
- Gather painter's tape, microfiber cloths, wax-and-grease remover and isopropyl alcohol
- Pick a mild, dry day and a shaded spot
On the day
- Wash the band below the molding and let it dry.
- Strip wax with the remover, then wipe with alcohol.
- Tape each piece up dry, top edge snug under the molding, and open each door.
- When the layout looks right, peel a few inches of liner at a time and press.
- Finish each piece with firm pressure along its length.
Even Protégé gaps
Measure the gaps between finished pieces and repeat them as you go, so the line looks even from any angle.
Afterward
Leave the car unwashed for a day so the tape can settle. Keep the box until every piece is on and you're satisfied.
If something doesn't fit
Stop before peeling the liner and call us. A piece that won't sit flat during the dry fit is easier to sort out then than afterward.
Questions
Call with your year and door count, and tell us if anything about the molding has been changed.
Why the tag matters
"Compact Car" is the body tag the record uses for this listing, and it pairs it with the 4-door. Use the door count, not the tag, when you check your car against it.
The 1990-1993 Protégé set is TH90704, UPC 691821635184; questions go to 877-752-3811.
TH90704 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH90704 |
| UPC | 691821635184 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4" |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1993 Mazda Protégé |
Fitment: TH90704
| Vehicle | Years | Body style |
|---|---|---|
| Mazda Protégé | 1990-1993 | 4-door, Compact Car |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH90704 Rocker Panel Trim, Upper Kit
Which Protégé does TH90704 fit?
The 1990-1993 Mazda Protégé 4-door, tagged "Compact Car."
Where does it install?
From the bottom of the molding down 4".
How many pieces?
Eight.
Does it fit the 2-door?
No, the 2-door has its own listing. Call 877-752-3811.
