Product Description
TH92370 Hyundai Elantra 1992-1994 Sedan Upper Kit, 5", Between the Wheel Wells, 6 Pieces
For the 1992-1994 Hyundai Elantra 4-door sedan, TH92370 is a six-piece Upper Kit in polished stainless steel. Its bullet reads "5" Width, Includes coverage between the wheel wells only," and the kit "Spans from the bottom of the molding DOWN to the specified width." In the title the closing year is cut to "94."
No linked parts here
This record has no siblings. QAA does list a ten-piece Elantra Upper Kit at the same 5" width, with a slightly longer year range and a front-pieces note, but it isn't linked to this listing, and the record doesn't compare the two. If you're trying to choose, call 877-752-3811 with your year and tell us how far along the car you want the trim to go.
What "between the wheel wells" means for you
The trim runs along the stretch between the front and rear wheel wells. The panels ahead of the front wheel well and behind the rear one aren't covered by this kit.
Six pieces, four doors
The record doesn't list positions. Sort the six with the photos, and write each one's place on its liner before you start.
Construction
For the 1992-1994 Elantra sedan, six 5" strips of polished 26 gauge 304 stainless from a USA shop fill the space between the wheel wells below the molding, held with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without harm.
Marking the line
Measure 5" down from the lower edge of the molding on each door and join the marks with masking tape. View it from a few steps back. If it runs past the door bottom anywhere, send a photo before ordering.
Molding check
Each piece's top edge sits against the molding. Look along the molding for any cracked, lifting or missing sections, and repair them first.
Cleaning steps
- Wash the band below the molding; rinse and dry.
- Take off old wax with a wax-and-grease remover.
- Touch up chips or rust on the Elantra and let it cure.
- Give it an isopropyl alcohol wipe just before fitting.
Placing the pieces
Hold each one up with painter's tape, top edge under the molding, and check the ends at the door gaps and near the wheel wells. Open each door. Then bond by peeling a few inches of liner at a time and pressing firmly.
Matching
Keep the Elantra gaps consistent across all six pieces.
Weather
Fit the Elantra trim mild, dry and shaded; no washing for a day.
One door first
Fit a single door completely and check the lower edge from the front and rear before going on. Mistakes are easy to fix before the liner comes off.
Before ordering
Send the year. Keep the box and liners until the work is done.
If a door on your car has been replaced or its molding refitted, measure that door on its own and mention it when you call.
Sort and label all six before peeling any liner.
Elantra kit TH92370 is sold under UPC 691821252299; for fit questions, phone 877-752-3811.
TH92370 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH92370 |
| UPC | 691821252299 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5" |
| Coverage / notes | Includes coverage between the wheel wells only; Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992-1994 Hyundai Elantra |
Fitment: TH92370
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Elantra | 1992-1994 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH92370 Rocker Panel Trim, Upper Kit
Which Elantra does TH92370 fit?
The 1992-1994 Hyundai Elantra 4-door sedan.
Does it reach the bumpers?
No, coverage is between the wheel wells only.
How wide is it?
5", from the bottom of the molding down.
How many pieces?
Six.
