Product Description
Ford Fusion & Mercury Milan 2010-2012 Stainless Wheel Well Accent Trim WQ50630, Full Width, Cut to Fit with Rocker Kit
WQ50630 is a four-piece polished stainless steel Wheel Well Accent Trim for the 2010-2012 Ford Fusion and Mercury Milan 4-door sedans. The note reads "Full Width, cut to fit with Rocker kit sold separately", and the listing describes it as "With 3M adhesive installation and black rubber gasket edging".
The four 2010-2012 Fusion and Milan sets
- WQ50630 (this set): Full Width, cut to fit with rocker kit, gasket edging.
- WQ50631: Narrow Width, cut to fit with rocker kit, no gasket edging.
- WQ50632: Full Length, full Width.
- WQ50633: Full Length, Narrow Width, no gasket edging.
No figures are given for "Full Width" or "Narrow Width"; compare the Fusion photos.
Which rocker kit?
This is the main question to settle. The note doesn't name the kit, and no rocker kit is linked in this record for the 2010-2012 Fusion or Milan. Call 877-752-3811 before ordering to find out which kit WQ50630 is cut for and whether it can be supplied. If you won't be fitting rocker trim, look at the Full Length sets instead.
Fitment
The title and the fitment list the Ford Fusion 2010-2012 and the Mercury Milan 2010-2012, 4-door sedans. Other years aren't on this record.
Material
The four full-width Fusion and Milan arch pieces are USA-made polished 26 gauge 304 stainless, fitted over the existing surface with 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime without damaging the 2010-2012 sedan.
Before ordering
Confirm Fusion or Milan, 2010-2012. Pick the width you want from the photos. Then confirm the rocker kit by phone, and order it with this set.
Rocker kit, then prep
Fit the rocker kit before the arches. Then clean each opening thoroughly: rinse, wash, rinse, dry, drain. The full-width pieces cover a broad band, so inspect all of it, paying special attention near the rocker trim where the cut ends will rest. Deal with wax, residue and chips; wipe with wax-and-grease remover; use isopropyl alcohol only when each piece is about to go on.
Bonding the cut pieces
Dry-fit each piece with its liner on and tape at the ends. Two checks against the photos: gasket seated against the opening, and cut end sitting beside the rocker trim. Then peel from the end away from the rocker trim, pressing firmly with your thumb along the curve, and set the cut end last. If anything doesn't line up, stop and phone 877-752-3811; don't cut the stainless.
Arrival and care
Count four pieces and check each cut end and gasket edge on arrival. After fitting, a day before washing; then mild soap and a soft cloth, without pressure-washer spray on the gasket.
Choosing your width
Full Width with gasket edging is the look this set gives; if a slimmer bare-edged line suits your Fusion or Milan better, WQ50631 is the narrow cut version. Keep every liner on until its piece has been held against the fitted rocker trim and compared with the photos.
Fusion and Milan kit WQ50630 carries UPC 691821644292. Talk to us at 877-752-3811.
WQ50630 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ50630 |
| UPC | 691821644292 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Full Width, cut to fit with Rocker kit sold separately |
| Edging | Black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2012 Ford Fusion and 2010-2012 Mercury Milan |
Fitment: WQ50630
| Vehicle | Years | Body style |
|---|---|---|
| Ford Fusion | 2010-2012 | 4-door, Sedan |
| Mercury Milan | 2010-2012 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Ford Fusion
- WQ50631: 4-piece Wheel Well Accent Trim
- WQ50632: 4-piece Wheel Well Accent Trim
- WQ50633: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Seat the black rubber gasket edging evenly along the wheel opening as you press the trim on.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ50630 Wheel Well Accent Trim
Which cars does WQ50630 fit?
The 2010-2012 Ford Fusion & Mercury Milan 4-door sedans.
Which rocker kit is it cut for?
The note doesn't say, and none is linked. Call 877-752-3811.
Does it have gasket edging?
Yes, black rubber gasket edging.
Is there a narrow version?
Yes, WQ50631, cut to fit, with no gasket edging.
