Product Description
Ford Fusion & Mercury Milan 2010-2012 Stainless Wheel Well Accent Trim WQ50632, Full Length, Full Width
WQ50632 is the Full Length, full-width four-piece polished stainless steel Wheel Well Accent Trim for the 2010-2012 Ford Fusion and Mercury Milan 4-door sedans. Its note reads "Full Length, full Width", and the listing describes it as "With 3M adhesive installation and black rubber gasket edging".
The widest look without a rocker kit
Of the four sets for these cars, WQ50632 combines full width, Full Length and black rubber gasket edging. WQ50630 is the full-width version cut to fit with a rocker kit. The narrow pair, WQ50631 (cut) and WQ50633 (Full Length), have no gasket edging. Neither width nor length is given in figures, so put the photos side by side to choose.
Rocker trim
No rocker kit is linked in this record. If you're planning one, call 877-752-3811 to ask which wheel well set suits it before ordering.
Fitment
Ford Fusion 2010-2012 and Mercury Milan 2010-2012, 4-door sedans. Both are in the title.
Material
The four full-length, full-width Fusion and Milan arch pieces are polished 26 gauge 304 stainless steel from a USA shop, set over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime with no harm to the sedan.
Before ordering
Confirm the car is a Fusion or Milan from 2010-2012 and that no rocker trim is planned. Compare the photos of the full and narrow sets.
Arch preparation
A broad piece covers a broad band, so clean beyond where you think the stainless will reach. Soap and rinse each opening, towel it, and allow drying time for the lip. Under a work lamp, inspect the whole band and a little beyond its edges; remove any wax film, glue or loose paint. Wipe with wax-and-grease remover. Keep the isopropyl alcohol until the piece is ready in your hand.
Fitting technique
Take a front corner first. Offer the piece up still backed, two strips of painter's tape at the ends, and check that the gasket meets the opening evenly from one lower end to the other. Satisfied, lift the backing at the front end and work rearward over the top of the arch in hand-width steps, pressing firmly behind the liner each time. Finish with a firm press along the whole length, then do the other front corner and compare.
Arrival and care
Open the box and confirm four pieces, checking every gasket edge. Let the trim sit a day after fitting before its first wash, use mild soap and a soft cloth, and keep pressure washers off the gasket. Call 877-752-3811 with any questions.
Choosing among the four
Two questions settle it. Will the car get rocker trim? If not, choose one of the Full Length sets. Do you want the wide line with rubber gasket edging, or a slimmer bare-edged line? Wide with gasket is WQ50632; narrow without is WQ50633. Keep every liner on until its piece has been dry-fitted on its arch.
WQ50632 is the Fusion set, barcode 691821665693. Dial 877-752-3811 with fit questions.
WQ50632 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ50632 |
| UPC | 691821665693 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Full Length, full Width |
| Edging | Black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2012 Ford Fusion and 2010-2012 Mercury Milan |
Fitment: WQ50632
| Vehicle | Years | Body style |
|---|---|---|
| Ford Fusion | 2010-2012 | 4-door, Sedan |
| Mercury Milan | 2010-2012 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Ford Fusion
- WQ50630: 4-piece Wheel Well Accent Trim
- WQ50631: 4-piece Wheel Well Accent Trim
- WQ50633: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Seat the black rubber gasket edging evenly along the wheel opening as you press the trim on.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ50632 Wheel Well Accent Trim
Which cars does WQ50632 fit?
The 2010-2012 Ford Fusion & Mercury Milan 4-door sedans.
Does it have gasket edging?
Yes, black rubber gasket edging.
Is there a cut-to-fit version?
Yes, WQ50630, full width & cut to fit with a rocker kit.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
