Product Description
Chevrolet Impala 2014-2020 Stainless Wheel Well Accent Trim WQ54135, 0.875" Wide, Cut to Fit with Rocker Kit
WQ54135 brings four polished stainless steel Wheel Well Accent Trim pieces to the 2014-2020 Chevrolet Impala 4-door sedan. QAA's listing gives "0.875" Width, cut to fit with Rocker kit sold separately" and "With 3M adhesive installation and black rubber gasket edging".
Not for the Limited
The fitment line says "Does not fit the Limited". If your car is the Impala Limited, this set isn't listed for it; call 877-752-3811.
The rocker kit
The note doesn't name the kit. The one rocker kit linked for this Impala is TH54135, eight pieces at 3-4.375" that span from the bottom of the door up. Confirm with 877-752-3811 that it's the kit WQ54135 is cut for before ordering.
Four or six pieces?
WQ54136 is the Impala's other set: six pieces at the same 0.875", "Full Length, rear trim pieces are segmented into two". So the two differ in cut and in how the rear pieces are made. If you aren't fitting rocker trim, WQ54136 is the one listed without the cut.
Material
The four 0.875" Impala arch strips, not for the Limited, are polished 26 gauge 304 stainless from a USA shop, held with 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime without damaging the sedan.
Impala group
Every linked part carries the same "Does not fit the Limited" note. There are door handle cover kits (DH54135, DH54135B, and DH54137B "w/4 smart key"), two mirror cover sets (MC54135 "Snap on replacement set" and MC54136), a two-piece head light accent, pillar sets PP54135 (4) and PP54136 (6), a 2.5" rear bumper accent, a 0.875" rear deck accent, a gas door cover and a license plate bezel.
Before ordering
Confirm a 2014-2020 Impala sedan that isn't the Limited, confirm the rocker kit by phone, and order it with this set.
Rocker kit, then prep
Fit TH54135, or whichever kit is confirmed, first. Then clean each arch: wash, rinse, dry, drain. Check the 0.875" band end to end, especially beside the new rocker trim, for wax, residue and chips. Wipe with wax-and-grease remover, then isopropyl alcohol right before each piece.
Fitting the cut pieces
Tape each piece up on its liner and compare it with the photos at the gasket line and at the cut end beside the rocker trim. Bond from the upper end downward, a short length at a time, finishing at the cut end. If the end won't meet the rocker trim as shown, stop and call 877-752-3811.
Arrival and care
When the box arrives, check for all four pieces and look at each cut end. After fitting, let a day pass before washing, then use mild soap and a soft cloth, keeping the pressure washer away from the gasket.
On the day
Have the rocker trim already on and fully pressed. Gather painter's tape, a plastic scraper, both cleaners and clean microfibres. Lay the four Impala pieces out by corner from the photos, cut ends toward the rocker side, and keep each liner on until its piece has been held in place and compared at both ends.
Impala set WQ54135 carries UPC 691821578931. For fit questions, phone 877-752-3811.
WQ54135 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ54135 |
| UPC | 691821578931 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.875" |
| Coverage / notes | Cut to fit with Rocker kit sold separately |
| Edging | Black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2020 Chevrolet Impala |
Fitment: WQ54135
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Impala | 2014-2020 | 4-door, Sedan, Does not fit the Limited |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2020 Chevrolet Impala
- DH54135: 8-piece Door Handle Cover Kit
- GC54135: 1-piece Gas Door Cover Trim
- HL54135: 2-piece Head Light Accent Trim
- LP54135: 1-piece License Plate Bezel
- MC54135: 2-piece Mirror Cover Set
- MC54136: 2-piece Mirror Cover Set
- PP54135: 4-piece Pillar Post Trim
- PP54136: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Seat the black rubber gasket edging evenly along the wheel opening as you press the trim on.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ54135 Wheel Well Accent Trim
Does WQ54135 fit the Impala Limited?
No. The fitment says "Does not fit the Limited".
Which rocker kit is it cut for?
The note doesn't say; TH54135 is the one linked. Call 877-752-3811.
How wide is it?
0.875".
Is there a Full Length version?
Yes, WQ54136, six pieces.
