Product Description
Cadillac XTS 2018-2019 Stainless Wheel Well Accent Trim WQ58245, 4 Pieces
WQ58245 is a four-piece polished stainless steel Wheel Well Accent Trim for the 2018-2019 Cadillac XTS 4-door sedan. The listing describes the set as "With 3M adhesive installation and black rubber gasket edging". No width is listed.
Fitment
Cadillac XTS sedan, 2018-2019 only. Earlier XTS years aren't covered by this listing; if yours is older, call 877-752-3811.
Four pieces
Each has black rubber gasket edging. Without a width on the record, judge the band from the photos, or ask 877-752-3811 for the measurement.
Material
The XTS set is four polished 26 gauge 304 stainless steel pieces produced in the USA, applied over the existing paint with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without causing damage to the sedan.
No rocker kit linked
The XTS group has no rocker kit, so there's nothing to fit first and no cut to consider.
Other XTS parts
- BC58245: a two-piece bumper cap accent on the rear bumper.
- RD58245: a 0.75" rear deck accent.
- LPS58245: a two-piece license plate surround extension trim.
Before ordering
Confirm 2018 or 2019 on your registration.
Arch prep for the XTS
Wait until the paint is cool and in shade. For each opening, rinse out grit, shampoo with a soft mitt, rinse and pat dry, then give the lip time to drain. Look along the band with a lamp and feel with a fingertip for any old glue, wax film or chips. Glue goes with a plastic scraper, chips get touch-up. Wax-and-grease remover across the band, and isopropyl alcohol just as the piece is ready.
Fitting
Mark each liner with its corner from the photos. At the first opening, tape the piece on with its liner and confirm the gasket meets the arch along its length. Peel a short length at the lower rear end, press firmly and continue forward over the arch. Press the whole piece once more, then do the next opening.
Arrival and care
Four XTS pieces should be in the package. Wait a day after installing before any wash, then use mild soap and a soft cloth and keep the gasket clear of a pressure washer.
Judging the band
With no width listed, compare the photos with your XTS's arch lips, and if you need the measurement before ordering, ring 877-752-3811 with SKU WQ58245 and UPC 691821625871.
On the day
Put painter's tape, a plastic scraper, a lamp, wax-and-grease remover, isopropyl alcohol and microfibres in reach. Lay the four pieces out by corner and check each against the photos while the liners are still on. If any piece won't follow its arch when held up, stop before exposing adhesive and call. After fitting, walk around the car from a few steps away and press any section that hasn't seated.
Keep the pieces flat and covered in their box until the day, and check the box label reads WQ58245 before opening any liner.
Wash only after a full day.
The XTS set for 2018-2019 is WQ58245, UPC 691821625871. Phone 877-752-3811 for advice.
WQ58245 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ58245 |
| UPC | 691821625871 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Edging | Black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2019 Cadillac XTS |
Fitment: WQ58245
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac XTS | 2018-2019 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2019 Cadillac XTS
- BC58245: 2-piece Bumper Cap Trim Accent
- RD58245: 1-piece Rear Deck Accent
- LPS58245: 2-piece License Plate Surround Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Seat the black rubber gasket edging evenly along the wheel opening as you press the trim on.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ58245 Wheel Well Accent Trim
Which XTS years does WQ58245 fit?
2018-2019, 4-door sedan.
Is a width listed?
No. Call 877-752-3811.
Is a rocker kit linked?
No.
Does it have gasket edging?
Yes, black rubber gasket edging.
