Product Description
Rear Bumper Cap Trim for the 2018-2019 Cadillac XTS Sedan, 2-Piece Polished Stainless (BC58245)
The back of a Cadillac XTS is broad and smooth, and BC58245 gives that rear bumper a pair of polished stainless accents. QAA catalogs this two-piece bumper cap trim for the 2018-2019 XTS 4-door sedan, with a note that it goes on the rear bumper. On a sedan with this much smooth sheet metal at the back, a little bright steel goes a long way, and the rear bumper is a natural spot for it.
The XTS it fits
Fitment is listed as the Cadillac XTS 4-door sedan for model years 2018 and 2019. That is the complete list in the QAA catalog for this part. Owners of other XTS years should call us before ordering rather than assume it will fit. The Fitment tab shows the exact catalog row as QAA lists it.
Rear-mounted accent
Unlike front bumper caps, this set lives at the back of the car, which makes it the detail drivers behind you will notice. The two pieces sit on the rear bumper as bright accents over the painted surface. QAA does not describe the shape of each piece in the catalog, so please check the product photos for the layout.
Polished 304 steel
Both pieces are made in the USA from 26-gauge 304 stainless steel with a polished mirror finish. Because the trim is solid stainless, there is no plating to wear and no plastic underneath. Grade 304 is a mainstream stainless for exterior trim, and 26 gauge is the thickness of the sheet.
Installing the pair
QAA pre-applies 3M automotive-grade acrylic foam tape to the back of each piece, and they install directly over the existing surface of the rear bumper. No drilling and no part removal. QAA states the tape will hold for a lifetime without causing any damage to the paint. On this part, the prep matters more than the install itself: clean the bumper thoroughly, remove wax, and let it dry before you place the pieces. The Installation tab walks you through it.
Dressing up the back of the XTS
Several QAA parts for the 2018-2019 XTS sedan sit right near this one, which makes it easy to build a coordinated rear end. RD58245 is a one-piece rear deck accent at 0.75" wide. LPS58245 is a two-piece license plate surround trim that QAA describes as extension trim. Together with these bumper caps, they put polished steel across the whole rear of the car. For the sides, WQ58245 is a four-piece wheel well accent kit for the same sedan. All are linked from the Fitment tab.
A suggested rear package
Bumper caps, the rear deck accent, and the license plate surround work as a set. Installing them on the same day, in good light, lets you line everything up by eye at once, so the rear of the XTS looks balanced.
Get in touch
Call Quality Automotive Trims at 877-752-3811 and ask about part number BC58245. The UPC appears in the Specs tab.
BC58245 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | BC58245 |
| UPC | 691821450039 |
| Part type | Bumper Cap Trim Accent |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | On rear bumper |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2019 Cadillac XTS |
Fitment: BC58245
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac XTS | 2018-2019 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2019 Cadillac XTS
- WQ58245: 4-piece Wheel Well Accent Trim
- RD58245: 1-piece Rear Deck Accent
- LPS58245: 2-piece License Plate Surround Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Bumper Cap Trim Accent
- Unpack all 2 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: BC58245 Bumper Cap Trim Accent
Is BC58245 for the front or rear?
The rear bumper.
Which Cadillac does it fit?
The 2018 and 2019 Cadillac XTS 4-door sedan.
How many pieces are included?
Two pieces of polished 26-gauge 304 stainless steel, made in the USA.
How does it install?
With pre-applied 3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without damaging the paint.
What else matches the back of the car?
RD58245, a 0.75" rear deck accent, and LPS58245, a two-piece license plate surround, are listed for the same XTS.
