Product Description
Cadillac XT6 2020-2025 Polished Stainless Gas Door Trim (GC60210)
GC60210 fits the Cadillac XT6 4-door SUV for 2020 through 2025, six model years on one Fitment row. A single piece of polished 304 stainless steel, 26 gauge and made in the USA, dresses the XT6's fuel door and mounts with 3M automotive-grade acrylic foam tape.
This trim is not a replacement cap and not a replacement part. The XT6 has to keep its own gas door, because the stainless piece is laid over that door's face.
The XT6 sheet lists a wide range of pillar options: seven sets, running from four pieces all the way to sixteen. PP60210 has four, PP60211 six, PP60212 eight and PP60213 ten, all without notes, so QAA doesn't say what each step's additional pieces cover. The three largest have notes that describe the front of the window line. PP60214, twelve pieces, includes the front pillar before the mirror. PP60215, fourteen pieces, includes a small front pillar after the mirror. PP60216, sixteen pieces, includes that small front pillar after the mirror and the front triangle. Because "before the mirror" and "after the mirror" describe different spots, compare the photos of PP60214 and PP60215 closely before choosing.
Eight more XT6 parts are cross-listed by number only: RD60210, LP60210, TH60210, RW60210, DH60210, RB60210, HL60210 and WQ60210. Their details are on their own listings rather than on this sheet, so open each one or call for help.
With that much choice in the pillars, it can help to start with something simple. The gas door piece is one flat overlay with nothing to match, and putting it on first gives you a sense of how much polished stainless you want on the vehicle.
GC60210 installs directly over the existing surface, so there's no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Since the bond is to the paint, inspect the gas door before starting and repair any faded, flaking or cloudy clear coat, chips at the edge, and bubbles. The door should close flush.
Begin the install by washing the door with soap and water. Rinse, dry, and degrease the face until a clean cloth shows nothing. Hold the trim on the closed door with its liner on and nudge it until an even frame of paint is visible around it. Mark the location with painter's tape. Then peel the liner, set the trim to the marks, and press it firmly across its full face. Wait a minute and press again. Open the door slowly to make sure it clears. The Installation tab describes each step in more detail.
On the XT6, polished 304 reads bright and reflective, while the 26 gauge sheet stays slim against the door. Fit it on a mild, dry day and give the tape the night to set. Afterward, a soft cloth with mild soap handles cleaning, and fuel drips should be wiped off promptly.
Want to ask about the matching pillar sets? Ring Quality Automotive Trims at 877-752-3811, quote GC60210, and find the UPC under Specs.
GC60210 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC60210 |
| UPC | 691821524006 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2025 Cadillac XT6 |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC60210
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac XT6 | 2020-2025 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2025 Cadillac XT6
- PP60210: 4-piece Pillar Post Trim
- PP60211: 6-piece Pillar Post Trim
- PP60212: 8-piece Pillar Post Trim
- PP60213: 10-piece Pillar Post Trim
- PP60214: 12-piece Pillar Post Trim
- PP60215: 14-piece Pillar Post Trim
- PP60216: 16-piece Pillar Post Trim
- RD60210: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC60210 Gas Door Cover Trim
Is GC60210 a replacement gas door?
No. It is not a replacement cap or replacement part. You must have the existing gas door to install this piece.
Which XT6 years fit?
The 2020-2025 Cadillac XT6 4-door SUV.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Which pillar sets cover the front pillar?
PP60214 includes the front pillar before the mirror; PP60215 and PP60216 include a small front pillar after the mirror, and PP60216 has the front triangle too.
