Product Description
Ford Explorer 2020-2026 Polished Stainless Gas Door Trim (GC60330)
GC60330 is made for the Ford Explorer 4-door SUV from 2020 through 2026, seven model years on one Fitment row. It's a single piece of 304 stainless steel, 26 gauge, with a polished finish, made in the USA, and its back is lined with 3M automotive-grade acrylic foam tape.
The Explorer trim is not a replacement cap and not a replacement part. The 2020-2026 Explorer's existing fuel door has to stay in place, because the polished stainless goes on its outer face.
Explorer owners planning more trim will find a varied list on this sheet. Both Explorer pillar sets, PP60330 (four pieces) and PP60331 (six), include the keyless entry touch pad; QAA doesn't explain the additional pair. Around the rear window there are two separate parts: RW60330, a two-piece rear window trim, and RHE60330, another two-piece rear window trim described as a small triangle piece behind the rear window trim (its note spells "Triangle" as "Trangle," which we've flagged). DH60330 is a four-piece door handle accent set. TH60330 is a six-piece upper rocker kit that spans from the bottom of the molding crease down. WS60330 is a four-piece window sill set covering the face of the sills only. RD60330 and SGR60330 are cross-listed by number only.
Two of those parts appear to belong together: the rear window trim and the small triangle piece described as sitting behind it. The catalog doesn't say whether either one is needed with the other. If one goes on, look at the other's photos too, so the look around the rear glass is complete.
The gas door trim needs no drilling, because it installs directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Before you begin, look at the paint on the fuel door; the tape is only as strong as that surface. Repair any clear coat that's lifting, cloudy or bubbled, and any chips on the edges. The door should close flush with the body.
When the door is ready, wash it with soap and water, rinse, and dry. A degreaser wipe follows, until your cloth is clean. Close the door and hold the trim against it with the liner still attached, moving it until the paint visible around it is even on every side. Mark the position with painter's tape. Peel the liner, line the trim up with the tape, and press it down firmly over the entire face; after a minute, press once more. Open the door slowly to confirm it swings clear. The Installation tab has the complete steps.
The polished 304 surface is bright and reflective, and at 26 gauge the overlay is thin. Install on a mild, dry day and let it set overnight. Clean with mild soap and a soft cloth, and wipe away fuel drips.
Explorer owners can call Quality Automotive Trims at 877-752-3811 about GC60330 with any question; the UPC is listed on the Specs tab.
GC60330 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC60330 |
| UPC | 691821718771 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2026 Ford Explorer |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC60330
| Vehicle | Years | Body style |
|---|---|---|
| Ford Explorer | 2020-2026 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2026 Ford Explorer
- PP60330: 4-piece Pillar Post Trim
- PP60331: 6-piece Pillar Post Trim
- RW60330: 2-piece Rear Window Trim
- RHE60330: 2-piece Rear Window Trim
- DH60330: 4-piece Door Handle Accent Trim
- TH60330: 6-piece Rocker Panel Trim, Upper Kit
- WS60330: 4-piece Window Sill Trim Set
- RD60330: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC60330 Gas Door Cover Trim
Is GC60330 a replacement gas door?
No. It is not a replacement cap or replacement part. You must have the existing gas door to install this piece.
Which Explorer years fit?
The 2020-2026 Ford Explorer 4-door SUV.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Do the pillar sets include the keyless entry touch pad?
Yes. Both PP60330 and PP60331 are noted as including the keyless entry touch pad.
