Product Description
TH87515 Nissan D21 Hardbody King Cab Lower Rocker Kit, 4.75", 10 Pieces
TH87515 is a ten-piece Lower Kit in polished stainless steel for the Nissan D21 Hardbody King Cab pickup, 1987-1995, and the fitment says "fits 1986 1/2 as well." It "Spans from the bottom of the door UP to the specified width," and that width is 4.75".
The middle height
D21 Lower Kits come in three heights: 3", 4.75" and 6.625". This one is in the middle. It covers more of the door than the 3" strip without reaching the 6.625" height. Measure up from the door bottom on your truck and mark 4.75" with masking tape to see where the top edge will land before you order.
Other King Cab kits
- TH87514: Full Kit, molding to door bottom, 5.5", 12 pieces
- TH87516: Lower Kit, 3", 10 pieces
- TH87517: Lower Kit, 6.625", noted "Long", 10 pieces
Same height, different cab
TH87520 is also a 4.75" ten-piece Lower Kit, tagged Regular Cab. The record tags them for different cabs, so treat them as separate listings. If you're not sure which cab you have, call 877-752-3811 and describe the truck, or send a photo of the side.
Material
The ten 4.75" D21 King Cab pieces are polished 26 gauge 304 stainless steel produced in the USA, fixed over the existing door surface with 3M automotive-grade acrylic foam tape. According to QAA, that tape will hold for a lifetime without damaging the Hardbody.
Surface prep
Wash the lower doors and bed side, strip old wax with a wax-and-grease remover, and repair any chips, rust or flaking paint along the bottom edge. The tape needs sound paint to grip. Finish with an isopropyl alcohol wipe just before fitting.
Ten pieces
The record doesn't say how the ten pieces divide along the side. Lay them out, match each to the photos, and label the liners before peeling anything.
Dry fit
Tape each piece up with its lower edge on the door bottom and check the top edge runs level. Open and close each door to check clearance.
Bonding
Peel the liner a few inches at a time, pressing as you go, and finish by running firm pressure along the full piece.
After the first pieces
Measure the D21 gaps and keep them consistent throughout.
Conditions
Choose a mild, dry day out of direct sun. Don't wash the truck for a day afterward.
Ordering
Tell us your year, the cab, and the bed so we can confirm the right D21 listing.
If you want the trim to reach the molding instead, the King Cab Full Kit, TH87514, is listed that way at 5.5". If you want a narrower look, TH87516 is 3". Measure both before deciding, and keep the liners on until every piece is placed.
Before you peel
Fit one door completely first, then step back and look along the whole side. Correcting a tilt is easy while the liners are still on and much harder once the tape has gripped the paint.
D21 Hardbody owners with the ten-piece kit can reach Quality Automotive Trims at 877-752-3811; quote TH87515, UPC 691821684014.
TH87515 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH87515 |
| UPC | 691821684014 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.75" |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1987-1995 Nissan D21 Hardbody |
Fitment: TH87515
| Vehicle | Years | Body style |
|---|---|---|
| Nissan D21 Hardbody | 1987-1995 | Pickup Truck, King Cab, fits 1986 1/2 as well |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1987-1995 Nissan D21 Hardbody
- TH87511: 10-piece Rocker Panel Trim, Lower Kit
- TH87512: 12-piece Rocker Panel Trim, Full Kit
- TH87516: 10-piece Rocker Panel Trim, Lower Kit
- TH87517: 10-piece Rocker Panel Trim, Lower Kit
- TH87518: 10-piece Rocker Panel Trim, Lower Kit
- TH87519: 12-piece Rocker Panel Trim, Full Kit
- TH87520: 10-piece Rocker Panel Trim, Lower Kit
- TH87514: 12-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH87515 Rocker Panel Trim, Lower Kit
Which truck does TH87515 fit?
The 1987-1995 Nissan D21 Hardbody King Cab pickup, and the fitment says it fits 1986 1/2 as well.
How tall is it?
4.75", measured from the bottom of the door up.
Is TH87520 the same kit?
It has the same height and count but is tagged Regular Cab. Call 877-752-3811 if unsure.
How many pieces?
Ten.
