Product Description
Chevrolet Lumina Sedan 1995-1998 Lower Rocker Kit, 6 Pieces, 3.75"-3.875" Tapered (TH35167)
TH35167 is a six-piece polished stainless steel Lower Kit for the 1995-1998 Chevrolet Lumina 4-door sedan. The width tapers only slightly, from 3.75" to 3.875", and the span note reads "Spans from the bottom of the door UP to the specified width." No other parts are linked to this listing.
An eighth of an inch of taper
The two width figures are an eighth of an inch apart. That's a gentle change, and on the car it will read as a nearly even band. The record doesn't say which end is taller, so check the photos and dry-fit each piece with its liner on; the taper should follow the line of the door rather than fight it.
From the bottom edge up
Because this is a Lower Kit, the reference is the bottom of the door, not a molding. The steel's lower edge lines up with the door bottom and rises to just under four inches. To see where the top edge will land, measure up from the door bottom and mark the line with painter's tape.
Six pieces on a four-door
The record gives six pieces without a layout. That doesn't divide into one per door evenly, and the data doesn't say whether any piece sits ahead of or behind the doors. Lay them out, compare them with the photos, and label each one.
The steel
Chevrolet's 1995-1998 Lumina sedan takes six tapered door strips that QAA forms in the USA out of polished 26 gauge 304 stainless, pressed on with 3M automotive-grade acrylic foam tape. QAA says this tape will hold for a lifetime and won't mark the car.
Paint at the very bottom
The bottom edge of a door collects chips and road salt. Look closely there before ordering. Wash, dry and wipe with isopropyl alcohol, then repair any flaking or bubbled paint and let it cure. The tape needs a sound surface along the whole band, including the edge.
Fitting
Hold each piece with its bottom edge level with the door's bottom edge. Peel a few inches of liner, press, then continue along, pulling the liner as you go. Finish with firm pressure across the whole piece.
Door gaps
After each piece is on, open and close that door and look at the gap to its neighbor. The ends should line up across the gap.
Even Lumina spacing
Measure positions from the door edges as you go and keep them consistent, then look along the car from the corners.
Supplies
For the Lumina, gather soap, isopropyl alcohol, lint-free cloths, painter's tape, a marker, a tape measure and a plastic tool.
Conditions
A dry, mild day, out of direct sun. The tape seats best when the steel and the paint are both at a moderate temperature, so let a car that has been parked in the sun cool first.
Care
Wait a day before washing. Mild soap and a soft cloth keep the finish clean; avoid abrasive pads.
For the six-piece Lumina kit TH35167 (UPC 691821520244), phone 877-752-3811.
TH35167 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH35167 |
| UPC | 691821520244 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 3.75" to 3.875" tapered |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1995-1998 Chevrolet Lumina |
Fitment: TH35167
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Lumina | 1995-1998 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH35167 Rocker Panel Trim, Lower Kit
Which Lumina does TH35167 fit?
1995-1998 Chevrolet Lumina, 4-door sedan.
How tall is it?
Tapered 3.75"-3.875", measured up from the bottom of the door.
How many pieces?
Six.
Is there other trim linked?
No parts are linked to this listing.
