Product Description
Dodge Intrepid ES with Ground FX, 1993-1996: Eight-Piece 5" Upper Rocker Kit (TH33912)
TH33912 is tagged for a specific Intrepid: the 1993-1996 Dodge Intrepid "4-door, Sedan ES w/ Ground FX." It's eight pieces of polished stainless steel, an Upper Kit at 5", with the note "Spans from the bottom of the molding DOWN to the specified width."
ES with Ground FX
The tag names both the ES trim and Ground FX. The record doesn't describe what Ground FX is or how it changes the fit, so we won't either. If your Intrepid is an ES with Ground FX, this is the listing written for it. If you're unsure whether yours has it, call 877-752-3811 with a photo of the lower side.
The other Intrepid kit
QAA also catalogs an eight-piece Lower Kit for the Intrepid sedan, listed for a year less, with a width range and no trim tag. It isn't linked here. The two kits work from different edges: this one down from the molding, that one up from the door bottom.
Hanging five inches
Measure five inches down from the underside of the molding at several points along each door and mark them with painter's tape. That's the line the bottom edge of the steel will follow. Look at it from the front corner of the car.
Fitment
Dodge Intrepid ES with Ground FX, 4-door sedan, 1993-1996.
Material
Cut in the USA from polished 26 gauge 304 stainless, the eight Intrepid ES pieces with Ground FX attach under the molding using 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime without harming the 1993-1996 Dodge.
Eight pieces
Positions aren't in the record. Match each piece to a door using the photos and label it.
Molding first
Because the kit hangs from the molding, the molding must be secure and straight. Press along each section and fix any that lift.
Clean and test
Wash, dry, then isopropyl alcohol across the band, working into the corner under the molding. On older paint, a painter's tape pull test shows whether it'll hold.
Mounting
Top edge snug under the molding with the liner on; check the bottom line against your tape marks. Peel, press, continue. Close each door gently afterward.
Even sides
Keep the Intrepid piece positions consistent.
Supplies
For the Intrepid: soap, alcohol, lint-free cloths, painter's tape, a tape measure and a plastic tool.
If something looks wrong
If a piece won't tuck under the molding, stands off the panel, or its bottom edge drifts well away from your tape marks during the dry-fit, stop before peeling. Take a photo and call; it's much easier to sort out before the tape bonds.
Checking door movement
After each door's piece is on, swing the door fully open and closed and watch the front and rear edges of the steel near the gaps.
Install day
Dry, mild weather. A day before washing. Mild soap and a non-abrasive polish keep it bright.
Intrepid owners can call 877-752-3811 about set TH33912, UPC 691821419425.
TH33912 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH33912 |
| UPC | 691821419425 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5" |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-1996 Dodge Intrepid |
Fitment: TH33912
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Intrepid | 1993-1996 | 4-door, Sedan ES w/ Ground FX |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH33912 Rocker Panel Trim, Upper Kit
Does TH33912 fit an Intrepid without Ground FX?
It's tagged ES w/ Ground FX. Call 877-752-3811 about other Intrepids.
How far down does it reach?
5" from the bottom of the molding.
Which years?
1993-1996.
How many pieces?
Eight.
