Product Description
Dodge Intrepid 1993-1995 Lower Door Kit, Eight Pieces, 6.5"-7.5" (TH33910)
TH33910 is an eight-piece polished stainless steel Lower Kit for the Dodge Intrepid sedan, 1993-1995. The record gives the width as a range, 6.5-7.5", and the span note "Spans from the bottom of the door UP to the specified width." So the steel starts at the bottom of each door and rises somewhere between six and a half and seven and a half inches.
What the range means for you
The record doesn't explain the range. It could reflect pieces of different heights, a taper, or something else; we can't tell from the data, so we won't say. The practical step is to look at the product photos for each piece's shape, then measure up from the bottom of your doors to where you'd expect the top edge to land. Call 877-752-3811 if anything doesn't line up.
Two Intrepid kits, not linked
QAA also catalogs an eight-piece Upper Kit for the Intrepid, tagged for the ES with Ground FX and listed for a year longer. It isn't linked to this listing. That kit hangs from the molding; this one rises from the door bottom. If your Intrepid is an ES with Ground FX, ask us which suits it.
Fitment
Dodge Intrepid, 4-door sedan, 1993, 1994 and 1995. No trim restriction appears on this record.
Build
Dodge's 1993-1995 Intrepid gets eight tapered door strips, which QAA forms in the USA out of polished 26 gauge 304 stainless and secures with 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime and won't mark the sedan.
Laying out
The record doesn't say where the eight pieces go. If they vary in height, use that and the photos to match them to doors. Label each liner.
Previewing the top line
Run painter's tape across a door at six and a half inches from the bottom and again at seven and a half. The finished top edge falls in that band. Look at it from a few steps back before you commit.
Cleaning a tall band
Wash, dry, then isopropyl alcohol over the full height, several passes. Feel for bumps or old repairs; tall polished panels show them.
Install
Rest the bottom of each piece along the door's lower edge with the liner on. Check the top line, then peel from one end and press, working from the middle outward to release air.
Door swing
Open and close each door after its piece and watch the bottom edge.
Matching
Measure the Intrepid top-edge heights and keep them consistent.
Supplies
Soap, isopropyl alcohol, cloths, painter's tape, a tape measure, a plastic tool, and a helper.
Before you call
Have your model year, trim, and a photo of one door's lower half with a tape measure held up from the bottom edge. Those three things let us compare your car with the photos and the 6.5-7.5" range quickly.
Conditions
Mild and dry; a day before washing; soft cloths afterward.
Dodge Intrepid kit TH33910 (UPC 691821587193): Quality Automotive Trims answers at 877-752-3811.
TH33910 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH33910 |
| UPC | 691821587193 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6.5" to 7.5" tapered |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-1995 Dodge Intrepid |
Fitment: TH33910
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Intrepid | 1993-1995 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH33910 Rocker Panel Trim, Lower Kit
How tall is TH33910?
The record lists 6.5-7.5", measured up from the bottom of the door.
Which Intrepid years?
1993-1995 sedan.
Does it fit an ES with Ground FX?
This record has no trim restriction, but QAA catalogs a separate Upper Kit tagged ES w/ Ground FX. Call 877-752-3811.
How many pieces?
Eight.
