Product Description
1998-2000 Chevy Blazer 4-Door w/ Molding & Flares, Lower Rocker Kit 5", 8 Pieces (TH38193)
Four doors, molding and flares: that's the 1998-2000 Chevrolet Blazer TH38193 is tagged for, written in the record as "4-door, SUV w/ Molding, w/ Flares." It's an eight-piece polished stainless steel Lower Kit, 5" tall, that "Spans from the bottom of the door UP to the specified width."
The other Blazer kit
TH38192, also eight pieces and five inches, is tagged "2-door, SUV, w/ Molding, NO flares." Because the two tags differ in both door count and flares, a four-door without flares, or a two-door with them, isn't covered by either record. Owners of those trucks should call 877-752-3811 before ordering.
Eight pieces, four doors and flares
How the eight pieces divide between doors and the body near the flares isn't described in the data. The product photos show it. Lay the set out next to your Blazer and match each piece before peeling anything.
Where the band sits
Low. The bottom edge of the steel follows the bottom of each door and rises five inches. Because the tag mentions molding, measure from the door bottom to the underside of your molding. If it's under five inches, the trim would meet it; call before ordering.
Steel
Blazer steel: USA-made, polished 304 stainless, 26 gauge.
Tape
The eight 5" Blazer pieces go over the existing surface with 3M automotive-grade acrylic foam tape. Per QAA, that tape will hold for a lifetime and won't mark the Chevrolet.
Flare edges
Take your time on any piece that ends close to a flare. Hold it with painter's tape, check that its end lies flat and clear, and compare with the photos before committing.
Getting the surface ready
Wash the lower doors and body, dry thoroughly and wipe with isopropyl alcohol. On a truck of this age, check the bottom edges for chips and rust and repair them first.
Order of work
Front door, rear door, then any body pieces. Peel a short stretch of liner, set the end, and press steadily as the rest of the liner comes away. Finish each piece with firm pressure.
Rear doors
After the rear door pieces are on, open those doors fully and look at the gap near the flare and the bottom edge.
Gear
- A marker and painter's tape for the Blazer
- Tape measure
- Car soap, isopropyl alcohol and lint-free towels
- Plastic trim tool
Then
No washing for a day; mild soap after that.
Blazer door-edge readings
Measure positions from the door edges and keep each Blazer piece consistent.
Before ordering
Count the doors, look for flares at each wheel opening, and confirm the molding. Four doors, flares and molding together match this record. Any other mix, and it's worth a call with photos so we can check before you buy.
Weather
Install on a dry, mild day in the shade. Tape grabs poorly on a cold or damp panel, so wait out a chilly morning.
1998-2000 Blazer set TH38193, UPC 691821263899: Quality Automotive Trims, 877-752-3811.
TH38193 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH38193 |
| UPC | 691821263899 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5" |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1998-2000 Chevrolet Blazer |
Fitment: TH38193
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Blazer | 1998-2000 | 4-door, SUV w/ Molding, w/ Flares |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1998-2000 Chevrolet Blazer
- TH38192: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH38193 Rocker Panel Trim, Lower Kit
What does TH38193 fit?
1998-2000 Chevrolet Blazer 4-door SUV with molding and flares.
My four-door has no flares.
Neither linked kit is tagged for that. Call 877-752-3811 with photos.
How tall?
5", from the door bottom up.
How many pieces?
Eight.
