Product Description
Toyota Venza 2009-2015 Pillar Post Trim, Four Polished Stainless Covers (PP29155)
PP29155 is the smallest of four linked pillar sets for the Toyota Venza, model years 2009-2015, tagged 4-door, Crossover SUV. It holds four polished covers in 26 gauge 304 stainless, made in the USA, and costs $67.99.
The family runs PP29155 (four covers), PP29156 (six), PP29157 (eight) and PP29158 (ten). Only the ten-cover listing carries a note, "Includes Front Pillar behind the mirror." This page says nothing about that front pillar, so don't assume a piece for it is in this box. Beyond that note, none of the four names its pillars or gives a width, which leaves the galleries to tell them apart. Go through each one, follow every outline, and decide where it would sit on your Venza. If these four shapes are the posts you want in bright steel, this is your page. If another gallery fits your plan, order that listing instead.
The Venza page links a good deal of other trim, each on its own listing: GC29155 (gas door cover trim), LB29155 (license bar above-plate accent trim), LP29155 (license plate bezel), RB29155 (rear bumper trim accent), RBI29155 (rear bumper trim insert), RD29155 (rear deck accent), TH29155 (rocker panel lower kit), TP29155 (trunk hatch accent trim) and WQ29155 (wheel well accent trim). None of them ships with these covers.
Seven model years are listed. The four Venza covers are tagged 2009-2015. If the crossover is outside 2009-2015, or anything about the shapes looks unfamiliar, call Quality Automotive Trims on 877-752-3811 and quote PP29155.
The covers dress the posts between the side windows and change nothing else; doors, glass and seals stay as they were. The steel is 304, which resists corrosion on its own without plating.
On each cover's back is 3M automotive-grade acrylic foam tape, and it bonds to the post finish your Venza has now. There's no drilling and no trim to pull. Read the Installation tab for the temperature range and cure time.
Because the bond is only as good as that finish, look over all four posts first. Chalk that rubs off on a fingertip, hairline crazing, a corner starting to peel, or a film of wax each need sorting out. Then wash and rinse, let the posts dry, and go over each with rubbing alcohol on lint-free cloths until one stays clean.
Gather car soap, a bucket, alcohol, cloths, painter's tape and a pencil. A friend standing a few paces from the crossover helps you judge whether each cover sits level.
Wait for calm, dry weather and shade. Check the four covers against their photos and ring us about anything bent or missing. Find each one in the photos. Backing on, set a cover against its post, slide it until the margin is even, and outline it with painter's tape. Peel, ease it into the outline, press firmly from end to end and along both edges, and fit the next one.
A cover that won't sit flat keeps its backing until you've called 877-752-3811. Once cured, the covers wash with car soap alongside the paint and dry with a soft towel.
PP29155 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP29155 |
| UPC | 691821432226 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2015 Toyota Venza |
Fitment: PP29155
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Venza | 2009-2015 | 4-door, Crossover SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2015 Toyota Venza
- GC29155: 1-piece Gas Door Cover Trim
- LB29155: 1-piece License Bar, Above plate accent Trim
- LP29155: 1-piece License Plate Bezel
- PP29156: 6-piece Pillar Post Trim
- PP29157: 8-piece Pillar Post Trim
- PP29158: 10-piece Pillar Post Trim
- RB29155: 1-piece Rear Bumper Trim Accent
- RBI29155: 1-piece Rear Bumper Trim Insert
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP29155 Pillar Post Trim
What does PP29155 fit?
The Toyota Venza, 2009-2015, tagged 4-door, Crossover SUV.
Does it include the front pillar behind the mirror?
The listing doesn't say so. Only PP29158, the ten-cover set, notes "Includes Front Pillar behind the mirror."
What other pillar sets are linked?
PP29156 with six covers, PP29157 with eight and PP29158 with ten.
Is drilling needed?
No. The covers mount with 3M automotive-grade acrylic foam tape directly over the existing surface.
Who can I call?
Quality Automotive Trims on 877-752-3811. Quote PP29155.
