Product Description
Toyota Venza 2009-2015 Polished Stainless License Bar (LB29155)
LB29155 is a one-piece license bar for the Toyota Venza, listed in the catalog as a 4-door crossover SUV, model years 2009 through 2015. Seven model years, one fitment row, no trim exclusions. It sits on the Venza's liftgate above the rear plate, putting a strip of polished stainless on an area that's otherwise bare paint.
Questions about whether it suits your Venza can go to Quality Automotive Trims at 877-752-3811. Mention LB29155 and we'll look it up with you.
Material
The bar is made in the USA from 26-gauge 304 stainless steel and polished to a mirror finish. It is cataloged as License Bar, Above plate accent Trim. The 304 designation is the stainless grade, and 26-gauge describes the sheet thickness. Polishing gives the bright, reflective surface you see in the photos. The Specs tab repeats these details along with the UPC.
Mounting
It mounts with 3M automotive-grade acrylic foam tape, and the bar installs directly over the existing surface. You don't drill the liftgate or remove anything. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
What the catalog leaves open
No width is listed, and there's no note about key access, a camera opening or a logo cutout. That leaves the product photos as the reference for shape and placement. Look at the area above your plate and compare. If you see anything there that isn't in the photos, call before ordering rather than after.
Confirming your vehicle
Your records show the model and year. Anything from 2009 to 2015 badged Venza is on the listing. Outside that range, this part number isn't listed, so search by your year instead.
Doing the install
Work on a dry day within the temperature range on the Installation tab. Wash the area, rinse and dry. Wipe twice with rubbing alcohol on a clean cloth; on a Venza from the early part of this range, old wax may need a third pass. Look for chips or lifting clear coat and avoid placing tape over them. Hold the bar in place, liner on, and look from behind the vehicle. Adjust until it is centered over the plate and level. Mark the ends with painter's tape, peel, line up and press firmly from the middle out. Remove the marks and press again. Close the liftgate gently for the first day.
Venza parts on the same list
Twelve other parts are cross-listed. GC29155 is a one-piece gas door cover trim, LP29155 a one-piece license plate bezel and RB29155 a one-piece rear bumper trim accent. PP29155, PP29156, PP29157 and PP29158 are pillar post kits of four, six, eight and ten pieces, and the ten-piece Includes Front Pillar behind the mirror. RBI29155, RD29155, TH29155, TP29155 and WQ29155 are named by number only on this sheet; open those listings for details. Check each listing's photos for its finish.
To clean, use mild soap and water with a soft towel. Avoid scouring pads.
LB29155 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB29155 |
| UPC | 691821490844 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2015 Toyota Venza |
Fitment: LB29155
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Venza | 2009-2015 | 4-door, Crossover SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2015 Toyota Venza
- GC29155: 1-piece Gas Door Cover Trim
- LP29155: 1-piece License Plate Bezel
- PP29155: 4-piece Pillar Post Trim
- PP29156: 6-piece Pillar Post Trim
- PP29157: 8-piece Pillar Post Trim
- PP29158: 10-piece Pillar Post Trim
- RB29155: 1-piece Rear Bumper Trim Accent
- RBI29155: 1-piece Rear Bumper Trim Insert
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB29155 License Bar, Above plate accent Trim
Which Venza years does LB29155 fit?
2009 through 2015, listed as a 4-door crossover SUV.
How many pieces?
One.
Is there a width listed?
No. See the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Does it have a key or camera cutout?
The listing doesn't mention one.
