Product Description
Toyota Sienna 2004-2009 Polished Stainless License Bar (LB24150)
LB24150 stands on its own. It is listed for the Toyota Sienna 4-door minivan, model years 2004 through 2009, and the sheet cross-lists no other QAA parts for this minivan. For one bright accent on the back of an older Sienna, this is the single part the catalog lists here.
Part details
A single bar, cataloged as License Bar, Above plate accent Trim, meaning it sits on the liftgate above the rear plate. It is made in the USA from 26-gauge 304 stainless steel with a polished mirror finish. It mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface. Nothing is drilled or unbolted. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
The listing doesn't give a width, and it doesn't mention key access, a camera opening or a logo cutout. The product photos show the bar's shape and position. Compare them with your liftgate, and if anything on yours sits where the bar goes, call Quality Automotive Trims at 877-752-3811 with the part number LB24150 before ordering.
Confirm the year
The fitment row covers six model years, 2004 through 2009, 4-door minivan. Check the Sienna's model year against that range first. A Sienna outside that range isn't on this listing.
Paint condition comes first
On a minivan this age, the area around the plate has usually seen years of washing, waxing and road spray. The tape needs clean, sound paint. Wash the area thoroughly, rinse and dry it. Wipe it with rubbing alcohol until the cloth comes away clean; on older paint, two or three passes is normal. Look closely for chips, cracked clear coat or old adhesive left from a dealer badge. Remove adhesive residue carefully and let everything dry. If the paint is flaking where the bar will sit, fix that before installing, because tape holds only as well as the surface beneath it.
Install
Work in the temperature range on the Installation tab. With the liner still on, hold the bar above the plate and step back to see it from where others will. Adjust until it is centered and level, then mark each end with painter's tape. Peel the liner, line up with your marks, and press firmly along the whole length. Remove the marks and press again. Close the liftgate gently for the first day.
Getting the line right
A minivan liftgate is a large, open panel, so a bar set even slightly off-center shows. A helper standing behind the vehicle can tell you when it looks right while you hold it. Measure from each end of the bar to the nearest edge of the plate and match the two numbers. A strip of painter's tape along the lower edge keeps it level while you press. Take your time with this step; it decides how the finished job looks.
Looking after it
Use mild soap, water and a soft towel. Avoid abrasive pads and gritty compounds that scratch a polished surface.
LB24150 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB24150 |
| UPC | 691821333165 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2009 Toyota Sienna |
Fitment: LB24150
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Sienna | 2004-2009 | 4-door, Minivan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB24150 License Bar, Above plate accent Trim
Which Sienna years does LB24150 fit?
2004 through 2009, 4-door minivan.
Are there other QAA parts for this Sienna?
None are cross-listed on this sheet.
How wide is it?
The catalog doesn't give a width. See the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
