Product Description
Toyota Venza 2009-2015 Pillar Post Trim, Ten Stainless Covers incl. Front Pillar (PP29158)
One line in the PP29158 record sets it apart from the other Venza pillar sets: "Includes Front Pillar behind the mirror." The catalog doesn't describe that piece any further, so find it in the gallery and work out where it sits on your crossover before you order. The set as a whole is ten polished stainless covers for the 2009-2015 Toyota Venza, tagged 4-door, Crossover SUV, priced at $111.99 and made in the USA from 26 gauge 304 stainless.
Three linked siblings come in smaller counts: PP29155 with four covers, PP29156 with six and PP29157 with eight. None of them mentions the front pillar. Apart from this note, none of the four listings names its pillars or gives widths, so compare the galleries side by side. If you want bright steel on everything these ten photos show, the front pillar included, this is the page. If another gallery fits your plan, that listing is the one to order.
Also linked to the Venza, and sold separately: GC29155, LB29155, LP29155, RB29155, RBI29155, RD29155, TH29155, TP29155 and WQ29155. Their own pages describe them.
Seven model years are covered. Ten covers suit a Venza built 2009 through 2015. With ten pieces and a front pillar that isn't described in words, a call can save guesswork: Quality Automotive Trims, 877-752-3811, quoting PP29158.
Every piece is cosmetic, a slim polished face for a post or for the spot the photos show behind the mirror. Doors, glass and seals are untouched, and grade 304 resists corrosion on its own.
The pieces mount with 3M automotive-grade acrylic foam tape onto the Venza at each spot. Nothing is drilled and no trim comes off. See the Installation tab for the temperature range and cure time.
Ten positions means ten finishes to inspect, the front pillar's spot among them. A powdery bloom, fine crazing, a peeling corner or a film of wax at any one of them will weaken that cover's grip, so fix them first. Wash, rinse and dry, then wipe each spot with rubbing alcohol on lint-free cloths until a clean one stays white.
Bring car soap, a bucket, alcohol, lots of cloths, painter's tape, a pencil for numbering, a towel, and a helper to keep ten pieces in sequence and judge alignment.
Choose a calm, dry day with the crossover in shade. Check all ten against the photos, ringing us about anything bent or short, and identify the front pillar piece. Lay them out in fitting order. Keeping each backing on, hold a piece to its spot, adjust until the margin is even, and trace it with numbered painter's tape. Trace every position before peeling. Then work in order: peel, seat each piece in its tracing, press firmly along its length and edges, and move to the next. Step back regularly to compare.
If a piece won't lie flat, leave its backing on and phone 877-752-3811. Once cured, wash with car soap and dry with a soft towel. Expect a long, unhurried session.
PP29158 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP29158 |
| UPC | 691821523146 |
| Part type | Pillar Post Trim |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Includes Front Pillar behind the mirror |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2015 Toyota Venza |
Fitment: PP29158
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Venza | 2009-2015 | 4-door, Crossover SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2015 Toyota Venza
- GC29155: 1-piece Gas Door Cover Trim
- LB29155: 1-piece License Bar, Above plate accent Trim
- LP29155: 1-piece License Plate Bezel
- PP29155: 4-piece Pillar Post Trim
- PP29156: 6-piece Pillar Post Trim
- PP29157: 8-piece Pillar Post Trim
- RB29155: 1-piece Rear Bumper Trim Accent
- RBI29155: 1-piece Rear Bumper Trim Insert
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP29158 Pillar Post Trim
What does PP29158 fit?
The Toyota Venza 2009-2015, 4-door Crossover SUV.
What does the front pillar note mean?
The record says "Includes Front Pillar behind the mirror." It gives no further detail, so check the gallery or call 877-752-3811.
Do the smaller Venza sets include the front pillar?
Their listings don't mention it. Only this ten-cover set carries the note.
How is it attached?
With 3M automotive-grade acrylic foam tape directly over the existing surface. No drilling.
What's the price?
$111.99 for the ten-piece set.
