Product Description
Toyota Venza 2009-2015 Stainless License Plate Bezel (LP29155)
LP29155 is cataloged for the Toyota Venza, tagged as a 4-door Crossover SUV, from 2009 through 2015. Seven model years share one row with no trim exclusions. The bezel itself is a single piece of 26-gauge 304 stainless steel, mirror polished and made in the USA, designed to frame the plate area.
Bezel, bar and bumper
The Venza sheet includes two other one-piece parts for the rear. LB29155 is a License Bar, Above plate accent Trim, cataloged above the plate rather than around it. RB29155 is a Rear Bumper Trim Accent. Neither has a width listed, and the bezel doesn't either, so the product photos are how you'll judge whether two or three of them suit your vehicle together. Open them side by side. If you'd like help deciding, Quality Automotive Trims takes calls at 877-752-3811; give them LP29155 and any other SKUs you're considering.
Outline and openings
No dimensions, no cutout notes. Compare the bezel's outline in the photos with the area around your plate, paying attention to any lock, emblem, handle or lighting near it.
Applying it
The bezel uses 3M automotive-grade acrylic foam tape and goes directly over the existing surface, so there's no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Inspect and repair the paint around the plate first, then clean it with soap and water followed by rubbing alcohol. Do a dry fit with the liner on, mark the position with painter's tape, and only then peel and press. The Installation tab has the complete steps and the temperature range for the tape.
Pillar choices
The Venza has four pillar post kits. PP29155 has four pieces, PP29156 six, PP29157 eight, and PP29158 ten, with the note Includes Front Pillar behind the mirror. The photos on each show what's covered. GC29155 is a one-piece gas door cover trim. RBI29155, RD29155, TH29155, TP29155 and WQ29155 are cross-listed by number only. Check each listing for its finish.
Starting point
Of the rear parts, the bezel is the one built around the plate itself, so it's the natural first piece. Fit it, look at it for a few days in different light, then decide whether the bar or bumper accent would suit the Venza. Venza prep is covered on the Installation tab.
Year check
Check that your Venza is a 2009 to 2015 model. Every cross-listed part with details on this sheet has the same 4-door Crossover SUV tag as the bezel, so the same year check applies to later additions.
Plate frames
If your plate wears a dealer or decorative frame, refit it during the dry fit to make sure it doesn't sit over the bezel's edge, and decide which look you prefer before the liner comes off.
Care
Wash with mild soap and water and dry with a soft towel. Gritty polish, steel wool and scouring pads will scratch the mirror finish, so keep them away.
LP29155 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP29155 |
| UPC | 691821681648 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2015 Toyota Venza |
Fitment: LP29155
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Venza | 2009-2015 | 4-door, Crossover SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2015 Toyota Venza
- GC29155: 1-piece Gas Door Cover Trim
- LB29155: 1-piece License Bar, Above plate accent Trim
- PP29155: 4-piece Pillar Post Trim
- PP29156: 6-piece Pillar Post Trim
- PP29157: 8-piece Pillar Post Trim
- PP29158: 10-piece Pillar Post Trim
- RB29155: 1-piece Rear Bumper Trim Accent
- RBI29155: 1-piece Rear Bumper Trim Insert
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP29155 License Plate Bezel
Which Venza years does LP29155 fit?
2009 through 2015, 4-door crossover SUV.
Is it the same as LB29155?
No. LB29155 is a License Bar above the plate; LP29155 frames the plate area.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Are dimensions listed?
No. Use the photos or call 877-752-3811.
How many pieces?
One.
