Product Description
TH95480 Subaru Impreza & Outback Wagon 1993-2001 Upper Rocker Kit, 5", 6 Pieces
TH95480 is a six-piece polished stainless steel Upper Kit listed for the 1993-2001 Subaru Impreza and Subaru Outback Wagon. It "Spans from the bottom of the molding DOWN to the specified width," and the width is 5".
Sedan and "Crossover SUV"
Two fitment rows each name the Impreza and the Outback Wagon. One is tagged "4-door, Sedan," the other "4-door, Crossover SUV." The record doesn't pair each model with a body, and neither does the title. Tell us which car you have, with the year and body, at 877-752-3811.
Not the Legacy kit
QAA's Legacy listing also names an Outback Wagon, for a different year range and with a narrower band. The two aren't linked. If your car is an Outback Wagon, the record doesn't say which of the two listings applies to it, so please call before ordering.
Where the trim sits
The top edge sits against the lower edge of the molding; the bottom edge falls 5" lower. Mark that line with masking tape along all four doors and stand back to check it.
Six pieces, four doors
Six doesn't split evenly across four doors, and the record doesn't list positions or a length note. Use the photos to see the layout and sort the pieces, and label each liner.
Steel and tape
Impreza sedan and Outback Wagon owners get six 5" strips of USA-made polished 26 gauge 304 stainless steel, secured over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without harming the paint on the 1993-2001 Subaru.
Molding
Each piece starts at the molding, so it must be straight and firmly attached on every door. Repair any lifting section before fitting.
Preparing the paint
Wash the 5" band below the molding and rinse. Take off wax and polish with a wax-and-grease remover. Repair chips or rust and let touch-up cure. Wipe with isopropyl alcohol just before fitting.
Dry fit
Tape each piece up with painter's tape, top edge tucked under the molding. Open all four doors and look along the side from the front and rear.
Bonding
Peel a short section of liner, press, and continue to the end. Go back over the piece with firm pressure.
Impreza pieces four to six
Keep the Impreza gaps even throughout.
Conditions
Pick a mild, dry day in shade for the Impreza, and wait a day before washing.
One door first
Fit one door completely and check it from a few paces back before going on. Adjusting is easy while the liner is still on.
If a door has been replaced
The lower edge follows the molding, so a replaced door or refitted molding needs measuring on its own. Tell us which door it is when you call.
Sort the pieces on a soft towel so the polished faces stay unmarked.
Keep the box until every piece is on.
Impreza or Outback Wagon? Share model, year and body with Quality Automotive Trims at 877-752-3811. Kit TH95480, UPC 691821511945.
TH95480 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH95480 |
| UPC | 691821511945 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5" |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-2001 Subaru Impreza and 1993-2001 Subaru Outback Wagon |
Fitment: TH95480
| Vehicle | Years | Body style |
|---|---|---|
| Subaru Impreza | 1993-2001 | 4-door, Sedan |
| Subaru Outback Wagon | 1993-2001 | 4-door, Sedan |
| Subaru Impreza | 1993-2001 | 4-door, Crossover SUV |
| Subaru Outback Wagon | 1993-2001 | 4-door, Crossover SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH95480 Rocker Panel Trim, Upper Kit
Does TH95480 fit the Outback Wagon?
The fitment lists the 1993-2001 Outback Wagon alongside the Impreza. Call 877-752-3811 to confirm yours.
Where does it install?
From the bottom of the molding down 5".
Does it fit the Impreza sedan?
Yes, one row is tagged 4-door sedan.
How many pieces?
Six.
