Product Description
Nissan Sentra Sedan 1991-1994 No-Molding Full Kit TH91576, 9.25", 8 Pieces
TH91576 is an eight-piece polished stainless steel Full Kit for the 1991-1994 Nissan Sentra 4-door sedan, listed for cars with "No molding." The width bullet reads "9.25" Width, No molding."
One note that doesn't fit
The record also gives this kit the placement note "Spans from the bottom of the molding to the bottom of the door," which is the same as the "with molding" kit. For a car without a molding, it doesn't say what the top edge meets. Rather than pick an answer, we ask you to:
- Check the photos for the top edge position
- Mark 9.25" up from the door bottom on every door with masking tape
- Send us a photo of the side at 877-752-3811
The "with molding" partner
TH91575 is the sedan kit for cars with a molding: 6.5", also eight pieces. If your doors have one, the record points to that listing instead.
Material
On the 1991-1994 Sentra without molding, eight 9.25" strips of USA-made polished 26 gauge 304 stainless are pressed on using 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime and the sedan stays unharmed.
Preparing a wide band
Each piece covers 9.25" of height, so a lot of paint lies under the tape:
- Wash the Sentra's lower doors, then rinse.
- Strip wax and polish across the whole band.
- If a molding was removed in the past, clear any leftover adhesive and repair the marks.
- Repair chips or rust; the alcohol wipe comes last.
Eight pieces
The record doesn't list positions on the four doors. Sort them with the photos and label each liner before starting.
Dry fit
Hold each piece with painter's tape, bottom edge on the door bottom, and check the top edge runs level. Open every door.
Bonding
Peel a section of liner, press across the full height, and continue. Go over the piece again with firm pressure.
Pace
Without a molding to work against, take more time on the first door. Step back and check before moving on.
After the front doors
Hold the same spacing between all Sentra pieces.
Coupe owners
The coupe's "No molding" kit is a separate listing with fewer pieces, not linked here.
Conditions
Shade, mild weather, dry conditions; the Sentra waits a day for a wash.
Tools
A rigid ruler, painter's tape, masking tape, clean microfiber cloths, wax-and-grease remover, isopropyl alcohol and, if old molding adhesive is present, a plastic scraper. Lay the pieces on a towel so the polished faces stay unmarked while you sort them.
Before ordering
Give us the year, and confirm there is no molding on any door of the sedan. If you can, include the distance from the door bottom to the point you would like the trim to meet, and we will check it against the listing.
Keep the box and liners until the work is finished.
Photograph the car before you start so you can compare the finished line.
The no-molding Sentra kit is TH91576, UPC 691821377626; ring 877-752-3811 for fit help.
TH91576 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH91576 |
| UPC | 691821377626 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 9.25" |
| Coverage / notes | No molding; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1991-1994 Nissan Sentra |
Fitment: TH91576
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Sentra | 1991-1994 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1991-1994 Nissan Sentra
- TH91575: 8-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH91576 Rocker Panel Trim, Full Kit
Which Sentra does TH91576 fit?
The 1991-1994 Nissan Sentra 4-door sedan, listed for "No molding."
Where does the top edge sit?
The record doesn't say for a car without molding. Check the photos or call 877-752-3811.
How wide is it?
9.25".
How many pieces?
Eight.
