Product Description
TH91573 Nissan Sentra 1991-1995 Coupe Full Rocker Kit, With Molding, 6.5", 6 Pieces
TH91573 is a six-piece polished stainless steel Full Kit for the 1991-1995 Nissan Sentra 2-door coupe. The width bullet reads "6.5" Width, with molding," and the pieces span "from the bottom of the molding to the bottom of the door."
With molding or without
QAA lists two coupe Full Kits, split by whether a molding is fitted:
- TH91573: "with molding," 6.5", 6 pieces (this kit)
- TH91574: "No molding," 9.25", 6 pieces
So the first thing to check is your own doors. If there's a molding running along them, this is the listing the record gives for that car. If there isn't, look at TH91574.
A note on the wording
Both kits carry the same placement note, "Spans from the bottom of the molding to the bottom of the door," even the one marked "No molding." The record doesn't explain where the top edge sits on a car without one. That question belongs to the other listing, but if your car's molding has been removed or is partly missing, call 877-752-3811 before choosing either.
Measuring
Measure from the molding's lower edge to the bottom of the door, front and rear on both doors. Compare with 6.5". Readings much closer to 9.25" are a reason to call us.
Construction
For the Sentra coupe, QAA uses polished 26 gauge 304 stainless steel made in the USA, applied over the paint already on the car with 3M automotive-grade acrylic foam tape. QAA states that tape will hold for a lifetime with no damage to the vehicle's surface.
Molding condition
This kit depends on the molding as its top edge, so it needs to be straight and firmly attached along both doors. Repair loose sections first.
Prep
- Clean the coupe's doors under the molding; rinse well.
- Strip wax with a wax-and-grease remover, right up to the molding.
- Fill any stone chips on the Sentra's lower doors.
- Isopropyl alcohol on each door as the last step.
Six pieces
QAA prints no positions for the six. Use the photos to sort them, then mark each liner.
Fitting
Dry fit each piece with painter's tape between the molding and the door bottom, and open both doors. Then peel the liner a little at a time, press, and finish with firm pressure.
The remaining Sentra trim
Keep the Sentra gaps consistent from piece to piece.
Conditions
Choose a dry, shaded, mild day; hold off washing the Sentra overnight.
Ordering
Tell us the year, confirm the coupe, and say whether the molding is present on both doors. Keep the box until the job is done.
Sedan buyers
There is a separate pair of Sentra kits for the sedan, split the same way by molding, with different piece counts and a shorter year range. They aren't linked to this coupe listing, so ask us if you have the sedan.
Do one Sentra run, stand back, and check that line before the next.
No liner comes off until both Sentra doors have had a taped dry fit and the strip sits evenly.
Sentra coupe kit TH91573 – UPC 691821517565 – QAA on 877-752-3811.
TH91573 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH91573 |
| UPC | 691821517565 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6.5" |
| Coverage / notes | With molding; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1991-1995 Nissan Sentra |
Fitment: TH91573
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Sentra | 1991-1995 | 2-door, Coupe |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1991-1995 Nissan Sentra
- TH91574: 6-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH91573 Rocker Panel Trim, Full Kit
Which Sentra does TH91573 fit?
The 1991-1995 Nissan Sentra 2-door coupe with molding.
What if my car has no molding?
TH91574 is listed for "No molding." Call 877-752-3811 to confirm.
How wide is it?
6.5".
How many pieces?
Six.
