Product Description
Ford Mustang 1979-1992 Stainless Fuel Door Trim (GC17351)
Fourteen model years of the Ford Mustang, 1979 through 1992, are listed for GC17351. That covers the 2-door coupe, convertible and hatchback. The part is one polished overlay of 304 stainless steel, 26 gauge, made in the USA. The Mustang overlay bonds to the door by 3M automotive-grade acrylic foam tape. It bonds to the outer face of the fuel door.
One row, three body styles
Ford Mustang, 1979-1992, 2-door: coupe, convertible and hatchback. The Fitment tab shows it. No other Mustang trim is cross-listed on this sheet, so GC17351 stands alone.
It needs the original door
This is not a replacement cap and not a replacement part. You MUST have the existing gas door to install this piece. On a Mustang of this age, take a look at the door before ordering: it should be present, straight, and closing flush.
On an older Mustang, start with the paint
The tape bonds to the paint on the door face, so the condition of that paint decides how well the trim holds. Over decades, a fuel door may have been repainted, polished many times, or sun-faded. Check for flaking clear coat, chalkiness or bubbling under the paint. If you find any, repair the surface before installing. A clean, sound, wax-free surface is the goal.
No drilling
GC17351 installs directly over the existing surface. You don't drill or alter the body, which suits owners who want to keep an older car unmodified. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Installing it
- Wash the fuel door face and rinse.
- Wipe with degreaser to lift old wax and polish residue; let it dry.
- Close the door and dry-fit the trim, liner still on.
- Adjust until the border is even, then mark the body with painter's tape.
- Peel, align, and press firmly over the entire face. Press again after a minute.
- Open and close the door slowly to check clearance.
The Installation tab has the full write-up.
Judging the margin
On a small part, an uneven border is the first thing anyone notices. After the dry fit, step back a few feet and look at it straight on. If one side looks wider, shift it slightly before peeling.
Why a gas door accent
For an older car, small bright details are an easy way to freshen the look without changing anything permanent. The fuel door is a single flat panel, so the result shows immediately and there's no second piece to match. Nothing is drilled, so the body itself stays as it was, and the prep section above is where the real work is.
Conditions
Pick a dry day with mild temperatures. If the car is garaged, do the job inside and leave it dry overnight.
Care
Mild soap and a soft cloth keep it bright. Wipe off fuel drips after filling.
Order check
Mustang, 1979-1992, coupe, convertible or hatchback, original gas door in good condition.
Questions
Mustang questions on GC17351 can go to 877-752-3811. For this Mustang gas door trim, Specs lists the barcode.
GC17351 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC17351 |
| UPC | 691821735242 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1979-1992 Ford Mustang |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC17351
| Vehicle | Years | Body style |
|---|---|---|
| Ford Mustang | 1979-1992 | 2-door, Coupe, Convertible, Hatchback |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC17351 Gas Door Cover Trim
Is GC17351 a replacement gas door?
No. It is not a replacement cap or replacement part. You must have the existing gas door to install this piece.
Which Mustangs are listed?
The 1979-1992 Ford Mustang 2-door: coupe, convertible and hatchback.
What's it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it require drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
