Product Description
Ford F-150 Crew Cab, 5.5' Bed, No Flares (2009-2014): Twelve-Strip Stainless Molding Insert Kit (MI49316)
Here is a kit and a near-namesake that are easy to mix up. MI49316 is a twelve-piece body molding insert kit in polished 304 stainless, with strips 1.5 inches wide. AT49316, on the same sheet, is a twelve-piece body side molding accent trim listed at 0.375. Both are tagged for a Ford F-150 Crew Cab with no flares. They are separate products, and only one of them is described on this page.
MI49316's row is Ford F-150, 2009 through 2014, 4-door, pickup truck, Crew Cab, 5.5' bed, NO flares. AT49316's sheet line writes its bed in feet-and-inches form instead, which we've flagged so the two records read the same way. Beyond that, the catalog doesn't explain whether the narrow accent trim and the wider insert kit are alternatives or meant for different spots on the truck. If you're deciding between them, look through both photo sets and call Quality Automotive Trims at 877-752-3811 with the two numbers.
Is your truck the listed fit?
You're looking for a 2009 to 2014 F-150 Crew Cab with the 5.5' bed and no flares. The twelve-strip MI49316 covers 2009-2014 trucks. A tape measure along the bed floor, front wall to closed tailgate, or the build paperwork gives the bed. If the truck has flares, it falls outside this row.
The moldings matter as much as the tags. These strips lay over the existing body side moldings, so those need to be present, firmly attached and similar to the ones in the photos. Measure the flat face of one and compare it with 1.5 inches.
Specs
Twelve strips, 1.5 inches wide; 26 gauge 304 stainless steel with a polished finish; made in the USA. They're attached with 3M automotive-grade acrylic foam tape directly over the existing surface, so there's no drilling. The sheet doesn't say where each strip goes, so the photos are your layout.
Twelve pieces without confusion
On a towel, divide the twelve F-150 strips by the photos and mark a position on each liner. Clean the moldings with soap and water, dry them, and wipe them with rubbing alcohol. Fit a few at a time: liner on for the dry fit, painter's tape at the ends, then peel and press firmly from one end to the other. When the side is done, stand at the front corner and look down it before moving to the other. The Installation tab gives the temperature range for the tape.
Also listed
MI49301, a 10-piece insert kit at 1.5 for the Super Cab with 5.5' bed and flares; AT49306, a 12-piece Crew Cab accent trim with flares; AT49308, a 10-piece Regular Cab accent trim; GC49308, a 1-piece gas door cover trim; MC49307, a 2-piece mirror cover set, top half only; and MC49310, a 4-piece full hybrid mirror cover kit with a removable piece for the turn signal cut out when applicable. Twenty-six others are listed by number only.
Clean with mild soap and a soft cloth. Questions? 877-752-3811.
MI49316 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI49316 |
| UPC | 691821555031 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2014 Ford F-150 |
Fitment: MI49316
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2009-2014 | 4-door, Pickup Truck, Crew Cab, 5.5' Bed, NO Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2014 Ford F-150
- AT49306: 12-piece Body Side Molding Accent Trim
- AT49308: 10-piece Body Side Molding Accent Trim
- AT49316: 12-piece Body Side Molding Accent Trim
- GC49308: 1-piece Gas Door Cover Trim
- MC49307: 2-piece Mirror Cover Set
- MC49310: 4-piece Mirror Cover Set
- MI49301: 10-piece Body Molding Insert Trim Kit
- MI49303: 10-piece Body Molding Insert Trim Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 12 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI49316 Body Molding Insert Trim Kit
What does MI49316 fit?
The 2009-2014 Ford F-150 Crew Cab, 4-door, with a 5.5' bed and no flares.
Is AT49316 the same product?
No. AT49316 is a 12-piece accent trim at 0.375. The catalog doesn't explain how the two relate; compare photos or call 877-752-3811.
How many strips are in MI49316?
Twelve, each 1.5 inches wide.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
