Product Description
Chevrolet Equinox 2018-2024 Stainless License Plate Bezel (LP58160)
Two plate-area parts are cataloged for the 2018-2024 Chevrolet Equinox 4-door SUV, and LP58160 is the one that frames the plate itself. It's a single stainless License Plate Bezel listed on one row, seven model years long, with no exclusions. The other is LB58160, a two-piece part the catalog names "License Plate Bar Accent." Like the bezel, it is cataloged for the back of the SUV. The catalog doesn't say where it sits on the liftgate, how the two relate or whether their edges come close. If you want both, compare their photos and hold them in place together before you peel either one.
The Equinox has ten more linked parts beyond that bar. PP58160 and PP58161 are Pillar Post Trim kits with four and six pieces. RW58160 is a two-piece Rear Window Trim. TH58160 is an eight-piece upper rocker kit at 1", noted to span from the bottom of the cladding up. GC58160 is a one-piece Gas Door Cover Trim, and WS58160 a four-piece Window Sill Trim Set at 0.5" that covers the face of the sills only. RD58160, RB58160, WQ58160 and WQ58161 are linked by number only, without details on this sheet. Finish and mounting for each appear on its own listing.
LP58160 is 26-gauge 304 stainless steel with a mirror polish, made in the USA. It has no plated layer, so there's nothing on its surface to chip. The catalog doesn't give its dimensions. Use the product photos to compare its shape with your own Equinox, paying attention to anything near the plate it would need to clear.
The Equinox bezel mounts with 3M automotive-grade acrylic foam tape over the plate area's existing surface, no drilling. Per QAA, the tape holds for a lifetime with no damage to the vehicle's surface.
A good bond depends on good paint. Look over the area around the plate first and fix any chips or lifting clear coat. After that, peel away old adhesive or sticker residue, wash with soap and water, let it dry completely, and wipe with rubbing alcohol to clear the wax.
Stage the bezel next, liner still in place. From a few steps behind the SUV, nudge it until it looks even, then mark its edges with painter's tape. If the above-plate bar is part of your order, stage it at the same time so you can judge both. Peel, line up and press firmly around the bezel's whole outline. The Installation tab gives the full sequence and the temperature range the tape needs.
Equinox years for this bezel are 2018 to 2024. Try any plate frame during staging. For care, mild soap, water and a soft cloth. Call Quality Automotive Trims at 877-752-3811 and mention LP58160 with any question.
Because the bezel is a single piece with no screws or brackets, it's a quick job once the surface is ready, and a sensible first step if you're thinking about the larger kits for the Equinox later. Leave the bond undisturbed for a while before the first wash.
LP58160 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP58160 |
| UPC | 691821645961 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2024 Chevrolet Equinox |
Fitment: LP58160
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Equinox | 2018-2024 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2024 Chevrolet Equinox
- PP58160: 4-piece Pillar Post Trim
- PP58161: 6-piece Pillar Post Trim
- RW58160: 2-piece Rear Window Trim
- TH58160: 8-piece Rocker Panel Trim, Upper Kit
- LB58160: 2-piece License Plate Bar Accent
- GC58160: 1-piece Gas Door Cover Trim
- WS58160: 4-piece Window Sill Trim Set
- RD58160: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP58160 License Plate Bezel
Which Equinox years does LP58160 fit?
2018 through 2024, 4-door SUV.
What's the difference between LP58160 and LB58160?
LP58160 is the plate bezel; LB58160 is a two-piece above-plate accent. Stage both together if you buy both.
How is it attached?
With 3M automotive-grade acrylic foam tape directly over the existing surface. No drilling.
Does WS58160 cover the whole sill?
Its note says face of sills only. Check that listing for details.
What is it made of?
One piece of polished 26-gauge 304 stainless steel, made in the USA.
