Product Description
PP12531 Six-Piece Polished Stainless Pillar Posts, Nissan Versa 4-Door Sedan 2012-2019
Six pieces of polished 26 gauge 304 stainless steel, made in the USA, for the pillars of the Nissan Versa sedan. PP12531's fitment row covers the 4-door sedan for every model year from 2012 to 2019, and the title agrees. The four-piece version is PP12530.
Choosing the six-piece set. The catalog lists the count, not the coverage. Neither Versa pillar listing has notes or names its pillars. To decide, pull up both sets' photos and look along your car's side windows. Pick this set when the six-piece photos show a pillar you'd want covered that the four-piece set leaves out. Order one set; the data doesn't say whether they overlap.
Rocker trim and the rest. If you're planning the lower body too, this sheet lists TH12530, a 2-piece rocker panel trim that goes on the rocker and installs below the door, at 1.25. TH12531 and TH12532 appear by number only, without details, so call if you want to know what they are. Also listed for the same sedan: RD12530 (1-piece rear deck accent, 1.5), RB12530 (1-piece rear bumper trim accent), LB12530 (1-piece above-plate license bar accent trim), LP12530 (1-piece license plate bezel) and GC12530 (1-piece gas door cover trim). WQ12530 and WS12530 are by number only.
Checking your car. The row is for the Nissan Versa 4-door sedan, model years 2012-2019. Anything else, call Quality Automotive Trims at 877-752-3811 with PP12531.
Mounting. 3M automotive-grade acrylic foam tape, installed directly over the existing surface, with no drilling and nothing removed. Give PP12531 when calling 877-752-3811 about the Versa.
Preparation. A thorough wash, rinse and dry, followed by an isopropyl alcohol wipe on a lint-free cloth. Let it evaporate. Strip wax, sealant or coating from where the tape will sit, and fix chipped finish first.
Dry-fit all six. Lay the pieces on a towel, following the photos. Hold each to its pillar with the backing on. When the outline matches, mark the ends with painter's tape and label the backing. If one won't sit right, try another pillar.
Press. Peel one backing at a time, set the piece between its marks, and press firmly end to end, then along both edges. Do three fully, then the rest, and compare. The Installation tab lists the temperature range and cure time.
If a piece won't line up. Stop before peeling. Take a photo of it held in place and call us.
Light. Work in open shade or a well-lit garage, since glare hides small misalignments.
Care. Mild soap and a soft cloth. Skip steel wool.
The listing data sits on the Fitment and Specs tabs.
What to have ready. A bucket and sponge, clean microfiber towels, isopropyl alcohol, painter's tape, a marker for the backings and the photos on your phone. A step stool helps with the upper ends, and a helper standing back can tell you whether a piece sits level before the backing comes off.
Fit the first three completely, then use them as your spacing guide for the rest.
PP12531 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP12531 |
| UPC | 691821258475 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2012-2019 Nissan Versa |
Fitment: PP12531
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Versa | 2012-2019 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2012-2019 Nissan Versa
- GC12530: 1-piece Gas Door Cover Trim
- LB12530: 1-piece License Bar, Above plate accent Trim
- LP12530: 1-piece License Plate Bezel
- PP12530: 4-piece Pillar Post Trim
- RB12530: 1-piece Rear Bumper Trim Accent
- RD12530: 1-piece Rear Deck Accent
- TH12530: 2-piece Rocker Panel Trim, On the rocker
- TH12531: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP12531 Pillar Post Trim
What does PP12531 fit?
The 2012-2019 Nissan Versa 4-door sedan.
How many pieces?
Six. PP12530 is the four-piece set.
Is there rocker trim for the Versa?
TH12530 is a 2-piece rocker panel trim that installs below the door. TH12531 and TH12532 are listed by number only.
Is drilling needed?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
Which pillars are covered?
The listing doesn't name them. Compare the photos or call 877-752-3811.
