Product Description
Nissan Versa 2012-2019 Sedan Rear Bumper Trim, One Stainless Piece (RB12530)
RB12530 covers a long run of the Nissan Versa 4-door sedan: every model year from 2012 to 2019 is on one record. It is a single rear bumper accent in mirror-polished 304 stainless steel, made in the USA, and it attaches with 3M tape.
Eight years, one part
2012, 2013, 2014, 2015, 2016, 2017, 2018, and 2019, 4-door sedan. The catalog does not split the range, so the same accent is listed across all of it. If you want a person to double-check your specific car, call the number below.
What it brings
A rear bumper accent puts a polished line on the rear bumper cover. It is cosmetic, adhesive-mounted, and leaves the bumper unchanged underneath.
Rear-end companions
The Versa sedan has an unusually complete set of rear trim in the QAA catalog:
- LB12530, a license bar accent that sits above the plate
- LP12530, a license plate bezel
- RD12530, a rear deck accent
- GC12530, a gas door cover
Pairing the bumper accent with the license bar and bezel dresses the whole lower rear of the car.
Other linked kits
PP12530 and PP12531 pillar posts, WS12530 window sills, WQ12530 wheel well accents, and three rocker options (TH12530, TH12531, TH12532) are also linked to this sedan.
Material
Mirror-polished 26-gauge 304 stainless. The finish is the metal, with no chrome layer to lift.
Mounting
The Versa accent goes on with 3M automotive-grade acrylic foam tape over the existing bumper surface. QAA states that tape will hold for a lifetime without harming the Nissan.
Surface first
Give the rear bumper a thorough wash and let it dry. Then clean the exact spot where the accent will sit with a wax-free wipe. Plastic dressings and silicone sprays are the usual culprits when tape fails, so make sure none remain.
Install
Wait for a dry, moderate day. Test-fit the accent with the liner on and judge its line from directly behind the car. A short strip of masking tape at each end helps you return to that exact spot. Peel the liner and press firmly from the center outward. No washing for a few days. See the Installation tab for more.
Care
Hand wash with mild soap and dry with a soft towel. Abrasive pads scratch a mirror face.
Why choose it for a Versa
A small bright detail at the rear makes an everyday sedan look more finished, and it takes minutes.
Measure twice
A single bright strip on the rear bumper draws the eye straight to its ends, so any tilt or offset shows. Before the liner comes off, measure from each end of the accent to the bumper edges and adjust until they match. Then step back to eye level behind the car for one last look.
Before you order
Confirm on your registration that the car is the Versa sedan and that the year falls inside the range above.
Part details
Versa owners with questions can ring 877-752-3811 about RB12530, UPC 691821483358, from Quality Automotive Trims.
RB12530 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB12530 |
| UPC | 691821483358 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2012-2019 Nissan Versa |
Fitment: RB12530
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Versa | 2012-2019 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2012-2019 Nissan Versa
- GC12530: 1-piece Gas Door Cover Trim
- LB12530: 1-piece License Bar, Above plate accent Trim
- LP12530: 1-piece License Plate Bezel
- PP12530: 4-piece Pillar Post Trim
- PP12531: 6-piece Pillar Post Trim
- RD12530: 1-piece Rear Deck Accent
- TH12530: 2-piece Rocker Panel Trim, On the rocker
- TH12531: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB12530 Rear Bumper Trim Accent
What years of Versa does RB12530 fit?
The 4-door Nissan Versa sedan, 2012 through 2019.
How many pieces?
One.
What other rear trim pairs with it?
LB12530 license bar, LP12530 license plate bezel, RD12530 rear deck accent, and GC12530 gas door cover.
Do I need tools?
It mounts with 3M automotive-grade acrylic foam tape. It attaches with 3M automotive-grade acrylic foam tape.
What is it made of?
Mirror-polished 26-gauge 304 stainless steel, made in the USA.
