Product Description
Nissan Versa Sedan 2012-2019 Pillar Post Trim, Four Pieces of Polished Stainless (PP12530)
PP12530 is a four-piece pillar post set for the Nissan Versa 4-door sedan, and its single fitment row spans eight model years, 2012 through 2019. The pieces are polished 26 gauge 304 stainless steel, made in the USA. The title and row agree on the car, the years and the body.
Long year range, simple check
Eight years on one row is a wide window, so check your Versa's year before ordering. Make sure it's the sedan, the only body this row lists. If either detail doesn't match, call Quality Automotive Trims at 877-752-3811 and mention PP12530.
Four pieces or six
PP12531 is the six-piece pillar set for the same Versa sedan. Neither listing has notes, and neither names its pillars, so compare the two sets' photos with your car. Four pieces is the quicker job; six makes sense if its photos include a pillar you'd also want covered. The data doesn't say whether the sets overlap, so buy one.
Other Versa trim on the sheet
If you're planning more than the pillars, these are listed for the same sedan:
- TH12530: a 2-piece rocker panel trim on the rocker, installs below the door, listed at 1.25.
- RD12530: a 1-piece rear deck accent, listed at 1.5.
- RB12530: a 1-piece rear bumper trim accent.
- LB12530: a 1-piece license bar, above-plate accent trim, and LP12530, a 1-piece license plate bezel.
- GC12530: a 1-piece gas door cover trim.
- Listed by number alone: TH12531, TH12532, WQ12530 and WS12530.
Mounting
On the 2012-2019 Versa sedan, the four covers mount with 3M automotive-grade acrylic foam tape over the existing posts; nothing is drilled or taken off the Nissan.
Install, briefly
Wash the pillars, rinse and dry. Wipe with isopropyl alcohol on a lint-free cloth and let it evaporate. Remove wax or coatings from the contact area.
Offer each piece to its pillar with the liner on and check it against the photos. If it won't follow the outline, try a different pillar. Mark both ends with painter's tape when it's right, and write the location on the liner. Peel, place between the marks, and press firmly along the length and both edges. When the four Versa covers are on, look at them from a distance. The Installation tab gives the temperature range and cure time.
Light and tools
Open shade or a bright garage keeps glare from hiding a crooked edge. Have a bucket, sponge, towels, isopropyl alcohol, painter's tape, a marker and the photos ready.
Care
Mild soap and a soft cloth. No scouring pads or steel wool.
The Fitment and Specs tabs repeat what this listing shows.
If you're unsure
Don't peel a piece that doesn't look right. Recheck it against the photos and the other pillars, then take a photo of it held in place and call us. It's much easier to sort out a question before the tape touches the car. A helper standing back a few steps is also handy for judging whether each piece sits level.
PP12530 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP12530 |
| UPC | 691821609789 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2012-2019 Nissan Versa |
Fitment: PP12530
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Versa | 2012-2019 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2012-2019 Nissan Versa
- GC12530: 1-piece Gas Door Cover Trim
- LB12530: 1-piece License Bar, Above plate accent Trim
- LP12530: 1-piece License Plate Bezel
- PP12531: 6-piece Pillar Post Trim
- RB12530: 1-piece Rear Bumper Trim Accent
- RD12530: 1-piece Rear Deck Accent
- TH12530: 2-piece Rocker Panel Trim, On the rocker
- TH12531: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP12530 Pillar Post Trim
What does PP12530 fit?
The 2012-2019 Nissan Versa 4-door sedan.
Is there a six-piece set?
Yes, PP12531 for the same car. Compare the photos to see the difference.
Which pillars are covered?
The listing doesn't say. Call 877-752-3811 if the photos leave a question.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
How many pieces?
Four.
