Product Description
Nissan Versa 2012-2019 Sedan Stainless Wheel Well Accent Trim WQ12530, 4 Pieces, 0.875" Wide
WQ12530 is a four-piece, 0.875"-wide polished stainless steel Wheel Well Accent Trim for the Nissan Versa 4-door sedan, 2012-2019. The listing describes it as "With 3M adhesive installation and black rubber gasket edging".
Eight model years
The fitment covers the Versa sedan from 2012 through 2019 in one line, with no split by year or trim. The record lists the sedan only. If your Versa's wheel openings don't look like the photos, call 877-752-3811 with your year.
The set
Four pieces of stainless, 0.875" wide, each with black rubber gasket edging along the opening. The corner for each piece isn't written down in the record, so the photos are the reference.
Material
The four 0.875" Versa strips are formed by QAA in the USA from polished 26 gauge 304 stainless steel and attached over the existing surface with 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime with no harm to the Nissan sedan.
Arch cleaning
Wash and fully dry each wheel opening. Then look at the band where the trim will sit, and remove any old adhesive, wax or lifting paint. At the moment each piece is ready, wipe its strip with a wax-and-grease remover and then isopropyl alcohol.
Putting the pieces on
Write each piece's corner on its liner after checking the photos. Take one piece, hold it in position with the liner on, and tab the ends with painter's tape. Look along the gasket to be sure it follows the opening. Peel back an inch, press that end down, and keep going around the arch, pressing the gasket into place with the stainless. Then do another opening and compare.
Three rocker options
If you're fitting rocker trim to the Versa as well, read the three notes carefully: TH12530 is a two-piece On the rocker strip at 1.25" that installs below the door; TH12531 is a four-piece lower kit at 1" with trim crease, on the doors only, spanning up from the bottom of the door; and TH12532 is a four-piece upper kit at 1", on the doors only, spanning down from the bottom of the molding.
More Versa trim
Also linked: a gas door cover, a license bar above-plate accent, a license plate bezel, pillar sets PP12530 (4) and PP12531 (6), a rear bumper accent, a rear deck accent at 1.5" and a four-piece window sill set.
Care
Leave the car unwashed for a day. After that, mild soap and a soft cloth; keep pressure-washer spray off the gasket. If a piece won't follow its opening as the photos show, call 877-752-3811.
On arrival
Count the four pieces and compare each with the photos while the liners are still on. Choose a dry, mild day for the fitting and keep the stainless out of direct sun until it goes on. If you're fitting rocker trim, fit it first, then the arches.
WQ12530 covers four Versa pieces under UPC 691821641338. Unsure of fit? 877-752-3811.
WQ12530 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ12530 |
| UPC | 691821641338 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.875" |
| Edging | Black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2012-2019 Nissan Versa |
Fitment: WQ12530
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Versa | 2012-2019 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2012-2019 Nissan Versa
- GC12530: 1-piece Gas Door Cover Trim
- LB12530: 1-piece License Bar, Above plate accent Trim
- LP12530: 1-piece License Plate Bezel
- PP12530: 4-piece Pillar Post Trim
- PP12531: 6-piece Pillar Post Trim
- RB12530: 1-piece Rear Bumper Trim Accent
- RD12530: 1-piece Rear Deck Accent
- TH12530: 2-piece Rocker Panel Trim, On the rocker
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Seat the black rubber gasket edging evenly along the wheel opening as you press the trim on.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ12530 Wheel Well Accent Trim
Which car does WQ12530 fit?
The 2012-2019 Nissan Versa 4-door sedan.
How wide is it?
0.875".
How many pieces?
Four, with black rubber gasket edging.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
