Product Description
Nissan Versa Sedan 2012-2019 License Plate Bezel, Polished Stainless (LP12530)
Eight model years, one bezel. LP12530 is listed for the Nissan Versa 4-door sedan from 2012 through 2019, and it frames the rear plate area with a single piece of polished stainless steel. Only the sedan appears on the fitment row.
The part
License Plate Bezel, one piece, 26-gauge 304 stainless steel with a mirror polish, made in the USA. Mounts with 3M automotive-grade acrylic foam tape; it installs directly over the existing surface without drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
What to check against the photos
The catalog gives no dimensions and no notes about openings, so the product photos are the guide. Over an eight-year range, take a careful look at your own trunk, including the lock, emblem and anything near the plate, and compare. If something doesn't match, call Quality Automotive Trims at 877-752-3811 and quote LP12530 before ordering.
Bar, bezel, or both
LB12530 is also listed for this Versa: a one-piece license bar, cataloged as License Bar, Above plate accent Trim. The bar runs above the plate; the bezel frames it. You can pick one; using both gives a frame plus an accent line. Neither listing gives dimensions, so compare their photos together before choosing. RD12530, a one-piece part cataloged as Rear Deck Accent at 1.5", and RB12530, a one-piece rear bumper trim accent, are also listed for the back of the car.
Install steps
Remove the plate. Wash the area with soapy water, rinse and dry. Wipe it down with rubbing alcohol, paying attention to corners. On a Versa from the early part of the range, check for chips, faded clear coat or adhesive from an old plate frame, and deal with it. Dry-fit the bezel with the liner on and check margins from behind. Mark its position with painter's tape. Peel, place, and press firmly all the way around; repeat once. Refit the plate and close the trunk gently for the first day. The Installation tab gives the temperature range.
Sides and more
GC12530 is a one-piece gas door cover trim. PP12530 and PP12531 are pillar post kits of four and six pieces. TH12530 is a two-piece rocker trim at 1.25" that Installs below the door. TH12531, TH12532, WQ12530 and WS12530 are named by number only on this sheet. Check each listing's photos for finish.
Confirm the year
Your records will show a year from 2012 to 2019 if your Versa sedan is on the listing.
A sedan-only listing
The row names the 4-door sedan and nothing else. If your Versa has a different body style or model name, this listing doesn't cover it, and the catalog gives no cross-reference. A quick call settles it before you order.
Plate frames
Running a separate frame on the plate? Refit it during the dry fit to make sure it clears the bezel.
Care
Mild soap, water and a soft towel. Avoid gritty compounds.
LP12530 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP12530 |
| UPC | 691821528974 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2012-2019 Nissan Versa |
Fitment: LP12530
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Versa | 2012-2019 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2012-2019 Nissan Versa
- GC12530: 1-piece Gas Door Cover Trim
- LB12530: 1-piece License Bar, Above plate accent Trim
- PP12530: 4-piece Pillar Post Trim
- PP12531: 6-piece Pillar Post Trim
- RB12530: 1-piece Rear Bumper Trim Accent
- RD12530: 1-piece Rear Deck Accent
- TH12530: 2-piece Rocker Panel Trim, On the rocker
- TH12531: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP12530 License Plate Bezel
Which Versa does LP12530 fit?
The 2012-2019 Nissan Versa 4-door sedan.
Can I pair it with the license bar?
LB12530 is listed for the same Versa. Compare both listings' photos.
Are dimensions listed?
No. See the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
