Product Description
2012-2019 Nissan Versa Sedan Stainless License Bar, 1 Piece (LB12530)
LB12530 is a one-piece polished stainless bar that mounts above the rear license plate of the Nissan Versa 4-door sedan. QAA lists it for eight model years, 2012 through 2019, under the part name License Bar, Above plate accent Trim. It's cut from 26-gauge 304 stainless steel and made in the USA, and the mirror finish comes from polishing the steel itself.
The catalog keeps this listing simple. There's no width, no key access note and no trim restriction on the row, which covers the Versa sedan only. With so little written down, the product photos do the explaining: they show the bar's size, outline and position above the plate. Compare them with your Versa before ordering, and call if the area above your plate looks different, such as a lock, a camera or fitted badging.
The sedan, specifically
The row reads Nissan Versa, 4-door, sedan. Confirm that your car is the sedan and that its model year falls between 2012 and 2019; your records carry both. If you have a different body style, this listing doesn't cover it.
How it attaches
The bar uses 3M automotive-grade acrylic foam tape and goes directly over the existing surface, so nothing is drilled and nothing is removed. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Here's an approach that keeps a one-piece bar straight. Start with a clean, dry surface: soap and water first, then a wipe of rubbing alcohol to lift wax. With the liner still on, set the bar above the plate and look from directly behind the car, then from each rear corner. Use painter's tape to mark the ends once it looks right. Peel the liner, set the bar to your marks, and press firmly along its full length, starting in the middle. Leave the trunk closed and the car unwashed for a while so the tape can bond. The Installation tab covers temperature.
Other Versa parts
The sheet cross-lists eleven parts for the same sedan. For the rear, LP12530 is a one-piece license plate bezel, RD12530 a one-piece rear deck accent at 1.5", and RB12530 a one-piece rear bumper accent. GC12530 is a gas door cover. Pillar post kits come in four and six pieces. Three rocker options are listed: TH12530, a two-piece trim at 1.25" noted "Installs below the door"; TH12531, a four-piece lower kit at 1" "With trim crease" for the doors only; and TH12532, a four-piece upper kit at 1" that spans from the bottom of the molding down. WQ12530 is a four-piece wheel well accent at 0.875", and WS12530 a four-piece window sill set. Check each listing's photos before ordering.
Care
Wash with mild soap and water and dry with a soft towel. Avoid abrasive pads, which leave fine scratches on polished steel.
Versa owners with a question about LB12530 can reach Quality Automotive Trims at 877-752-3811. The Specs tab lists the UPC.
LB12530 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB12530 |
| UPC | 691821424290 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2012-2019 Nissan Versa |
Fitment: LB12530
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Versa | 2012-2019 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2012-2019 Nissan Versa
- GC12530: 1-piece Gas Door Cover Trim
- LP12530: 1-piece License Plate Bezel
- PP12530: 4-piece Pillar Post Trim
- PP12531: 6-piece Pillar Post Trim
- RB12530: 1-piece Rear Bumper Trim Accent
- RD12530: 1-piece Rear Deck Accent
- TH12530: 2-piece Rocker Panel Trim, On the rocker
- TH12531: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB12530 License Bar, Above plate accent Trim
Which Versa does LB12530 fit?
The 2012-2019 Nissan Versa 4-door sedan.
How wide is the bar?
The catalog doesn't give a width. The product photos show the size.
Does it include key access?
The listing doesn't mention key access. Compare the photos with your car or call 877-752-3811.
How does it attach?
With 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
