Product Description
Nissan Versa Sedan 2012-2019 Rear Deck Accent, Polished 1.5-Inch Stainless (RD12530)
RD12530 is one 1.5-inch-wide line of mirror-polished stainless steel for the trunk lid of the Nissan Versa 4-door sedan, model years 2012 through 2019. It is made in the USA from 304 stainless and installs over the existing surface with 3M tape.
Eight years on one record
2012, 2013, 2014, 2015, 2016, 2017, 2018, and 2019, all for the 4-door sedan. The record does not list any other Versa body style, so call if yours is not a sedan.
The complete rear
This Versa has a full set of linked rear pieces:
- RB12530, the rear bumper accent
- LB12530, a license bar above the plate
- LP12530, a license plate bezel
- GC12530, a gas door cover
With this deck accent, that is everything QAA lists for the back of the car; check each listing for its finish.
Three rocker kits, three placements
The rocker options are worth comparing because each sits in a different spot:
- TH12530, two pieces on the rocker, 1.25 inches, installing below the door
- TH12531, a four-piece lower kit, one inch, with a trim crease, spanning up from the bottom of the door
- TH12532, a four-piece upper kit, one inch, spanning down from the bottom of the molding
Lower and upper kits both cover the doors only, starting from opposite edges.
Other linked pieces
WQ12530 is a four-piece wheel well accent at 0.875 inches. WS12530 is a four-piece sill set. PP12530 and PP12531 are four- and six-piece pillar kits.
Material
26-gauge 304 stainless steel with a mirror polish, no plating.
Mounting
The Versa's 1.5" accent bonds with 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime without damaging the trunk lid.
Prep
Wash the trunk lid, dry it, and wipe the area with a residue-free cleaner. On an older sedan, look for chips or faded clear coat where the strip will sit and fix them first.
Install top-down
For a full rear, fit this deck accent first, then the license bar and bezel, and the bumper accent last. Dry-fit each with its liner on, measure from both ends, and mark with masking tape. Peel and press from the center out on a dry, mild day. Avoid washing for a few days. See the Installation tab.
Care
Mild soap and a soft cloth. Avoid abrasive pads, and dry the trunk lid after washing to prevent water spots.
Proportions to expect
This deck accent is listed at 1.5 inches. No widths are given for the bumper accent, license bar, or bezel, so check their photos to see how the full rear will balance. Laying every piece out with its liner on before installing any is the easiest way to judge the spacing between them.
Steel, not plating
Because the polish is the metal itself, the finish does not wear through with washing. All the linked Versa pieces share it, so buying more later keeps the car consistent.
Part details
SKU RD12530, UPC 691821370610. Call Quality Automotive Trims at 877-752-3811 for help choosing a rocker kit.
RD12530 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD12530 |
| UPC | 691821370610 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2012-2019 Nissan Versa |
Fitment: RD12530
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Versa | 2012-2019 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2012-2019 Nissan Versa
- GC12530: 1-piece Gas Door Cover Trim
- LB12530: 1-piece License Bar, Above plate accent Trim
- LP12530: 1-piece License Plate Bezel
- PP12530: 4-piece Pillar Post Trim
- PP12531: 6-piece Pillar Post Trim
- RB12530: 1-piece Rear Bumper Trim Accent
- TH12530: 2-piece Rocker Panel Trim, On the rocker
- TH12531: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD12530 Rear Deck Accent
Which Versa does RD12530 fit?
The Nissan Versa 4-door sedan, 2012 through 2019.
How wide is it?
1.5 inches.
How many pieces?
One.
What rear trim pairs with it?
RB12530 rear bumper accent, LB12530 license bar, LP12530 license plate bezel, and GC12530 gas door cover.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
