Product Description
TH93590 Nissan Quest 1993-1995 Minivan Full Kit, 8.625", Between the Wheel Wells, 7 Pieces
TH93590 is a seven-piece polished stainless steel Full Kit for the 1993-1995 Nissan Quest, tagged "3-door, Minivan." The bullet reads "8.625" Width, Includes coverage between the wheel wells only," and the pieces span "from the bottom of the molding to the bottom of the door."
An odd number of pieces
The record lists seven pieces and doesn't say where each one goes. What the odd piece covers isn't stated, and the "3-door" tag doesn't settle it either. Rather than guess, lay all seven out with the product photos before doing anything else, and phone 877-752-3811 if the photos leave any doubt about where a piece belongs.
Reading the tag
The record calls the Quest a 3-door minivan for these years. If your van's door count doesn't match that description, tell us when you call.
Between the wheel wells
Coverage runs between the front and rear wheel wells only. The pieces fill the space from the molding down to the door bottom along that stretch; nothing in the record describes trim beyond the wheel wells.
8.625" of height
That's a tall band, so measure carefully: from the lower edge of the molding to the door bottom, at the front and rear of every door. Readings that differ from 8.625" are worth a call before you order.
Material
On the 3-door Quest, seven strips of USA-made polished 26 gauge 304 stainless cover the area between the wheel wells, pressed on using 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without harming the minivan.
Door clearance
Whatever doors your van has, open and close each one fully during the dry fit, and watch for contact along the bottom edge of every piece.
Preparing the band
- Check the molding is firm along every door.
- Wash and rinse beneath it.
- Remove old wax from the Quest with wax-and-grease remover.
- Touch in any chips or rust, then let the repair cure.
- Give each area an alcohol wipe as the piece goes on.
Bonding
With a tall piece, press across its full height, not just along the edges. Peel a few inches of liner at a time and work from one end to the other.
Fitting the Quest pieces
Line the pieces up with one another wherever the doors allow.
Weather
Work in shade on a dry, mild day, and keep the Quest unwashed for a day.
If the molding is damaged
Every piece meets the molding along its top edge. Repair any cracked, loose or missing section before fitting, and send a photo of each side if you are unsure what you have.
One door at a time
Fit one door completely, step back and look along the side, then move on. Keep the box and liners until everything is on.
Tools
A rigid ruler, painter's tape, masking tape, microfiber cloths, wax-and-grease remover and isopropyl alcohol cover the job. Lay the pieces on a towel to protect the polished faces.
Quest minivan kit TH93590, UPC 691821370467. Quality Automotive Trims, 877-752-3811, with your year.
TH93590 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH93590 |
| UPC | 691821370467 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 7 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 8.625" |
| Coverage / notes | Includes coverage between the wheel wells only; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-1995 Nissan Quest |
Fitment: TH93590
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Quest | 1993-1995 | 3-door, Minivan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 7 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH93590 Rocker Panel Trim, Full Kit
Which Quest does TH93590 fit?
The 1993-1995 Nissan Quest, tagged 3-door minivan.
Why 7 pieces?
The record doesn't say how they divide. Check the photos or call 877-752-3811.
How wide is it?
8.625", molding to door bottom.
Does it reach the bumpers?
No, coverage is between the wheel wells only.
