Product Description
Toyota RAV4 2019-2025 Stainless License Plate Bezel, 1 Piece (LP19180)
LP19180 is a polished stainless frame for the plate area of the Toyota RAV4 4-door SUV, listed for model years 2019 through 2025. Seven years on one row, no trim exclusions. The bezel is one piece of 26-gauge 304 stainless steel with a mirror polish, made in the USA, and it attaches with tape rather than hardware.
Paint, not cladding
This bezel installs directly over the existing surface around the plate. One of the RAV4 parts on the same sheet works differently, and it's worth knowing the distinction. TH19180, a six-piece Rocker Panel Trim, Upper Kit, is noted as Installs on Top of plastic cladding, with an instruction to Use Promoter. That adhesive-promoter note belongs to TH19180 and its cladding mount. LP19180's mounting line doesn't mention promoter or cladding. If the area around your plate isn't painted the way the photos suggest, call Quality Automotive Trims at 877-752-3811 before you install, and quote LP19180.
Taping it down
The Rav4 bezel fixes with 3M automotive-grade acrylic foam tape, no drilling required. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Remove the plate, wash the surface with soapy water, rinse, let it dry, and wipe it with rubbing alcohol until a clean cloth shows nothing. Repair any chips first. Then hold the bezel in place with the liner on and step back to see that it sits level and centered. Painter's tape marks the spot. Peel, align, press firmly around the frame, and press again a minute later. The Installation tab lists the temperature range.
The license bar
LB19180, listed for the same RAV4, is a one-piece License Bar, Above plate accent Trim. Where the bar is an accent above the plate, this part frames the plate area. Neither listing gives dimensions, so if you're planning both, compare their photos to judge how they'll look together.
Pillar options
Five pillar post kits are cataloged for this SUV: PP19180 with four pieces, PP19181 with six, PP19182 with eight, PP19183 with ten and PP19184 with twelve, which Includes Front Triangle piece. RW19180, RHE19180, RD19180, SG19180 and WS19180 are cross-listed by number only. Check each listing for its finish.
Choosing where to start
Between a twelve-piece pillar kit and a six-piece rocker kit, the RAV4 list can turn into a weekend project. The bezel is the opposite: one piece, one place, and most of the time goes into cleaning the surface. It's a practical way to try the look first.
No dimensions on file
The catalog doesn't list a size or cutouts for this bezel, so the product photos are the guide. Compare the outline with your RAV4's plate area, including the lock, emblem and lighting nearby. If it doesn't match, a phone call settles it.
Check your model year, and refit any plate frame during the dry fit to be sure it clears the bezel. Mild soap, water and a soft towel keep the polish bright.
LP19180 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP19180 |
| UPC | 691821732098 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2019-2025 Toyota Rav4 |
Fitment: LP19180
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Rav4 | 2019-2025 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2019-2025 Toyota Rav4
- PP19180: 4-piece Pillar Post Trim
- PP19181: 6-piece Pillar Post Trim
- PP19182: 8-piece Pillar Post Trim
- PP19183: 10-piece Pillar Post Trim
- PP19184: 12-piece Pillar Post Trim
- TH19180: 6-piece Rocker Panel Trim, Upper Kit
- LB19180: 1-piece License Bar, Above plate accent Trim
- RW19180: 2-piece Rear Window Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP19180 License Plate Bezel
Which RAV4 years does LP19180 fit?
2019 through 2025, 4-door SUV.
Do I need adhesive promoter?
The promoter note is on the TH19180 rocker kit, not this bezel. Call 877-752-3811 if your plate area isn't painted.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Is it the same as LB19180?
No. LB19180 is a License Bar above the plate; LP19180 frames the plate area.
How many pieces?
One.
