Product Description
Polished Stainless License Bar, Toyota RAV4 2019-2025 (LB19180)
LB19180 is the license bar QAA lists for the newer RAV4 range: the Toyota RAV4 4-door SUV, model years 2019 through 2025. That is seven model years under one part number. The part is a single bar cataloged as License Bar, Above plate accent Trim, so it sits on the liftgate above the rear plate as one line of polished metal. Questions on fitting LB19180 to a Rav4 go to 877-752-3811.
Only that year range is on this listing. If your RAV4 is older than 2019, this is not the part for it; search the store by your model year instead. Order by year rather than appearance, and you'll land on the correct listing; your registration shows the Rav4's year. If the paperwork and the vehicle seem to disagree, call before ordering.
Build and finish
The bar is 26-gauge 304 stainless steel, polished to a mirror shine, and made in the USA. It mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface, so the liftgate isn't drilled and nothing is removed. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Information the sheet doesn't include
There is no width figure and no note about cutouts for a camera, handle or badge on LB19180's listing. We won't fill that in. The product photos show the shape and where it goes; hold them up against your own liftgate. If your RAV4 has something in that area that isn't in the photos, call Quality Automotive Trims at 877-752-3811 and mention the part number before you order.
Twenty-minute install
Most of the time goes into prep. Wash the spot above the plate and dry it. Wipe it twice with rubbing alcohol and let it evaporate. Do the job above the temperature listed on the Installation tab. Hold the bar in place with the liner on and check it from behind the vehicle: centered side to side and level with the plate. Mark both ends with painter's tape. Peel the liner, set the bar on your marks, and press hard from the middle outward. Pull the marks, press once more, and close the liftgate gently for the first day.
More parts for this RAV4
Twelve other parts are cross-listed. Pillar post kits PP19180 through PP19184 run four, six, eight, ten and twelve pieces, and the twelve-piece notes Includes Front Triangle piece. TH19180 is a six-piece rocker upper kit noted to install on top of plastic cladding with promoter; that instruction belongs to the rocker kit, not to this bar. RW19180 is a two-piece rear window trim. RHE19180, RD19180, SG19180, LP19180 and WS19180 are named by number only on this sheet, so open each listing for its type. Check every listing's photos for its finish before you combine parts.
Cleaning
Wash the bar along with the paint using mild soap and a soft cloth. Abrasive pads and gritty polishes will dull a mirror finish, so leave them out.
LB19180 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB19180 |
| UPC | 691821538119 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2019-2025 Toyota Rav4 |
Fitment: LB19180
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Rav4 | 2019-2025 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2019-2025 Toyota Rav4
- PP19180: 4-piece Pillar Post Trim
- PP19181: 6-piece Pillar Post Trim
- PP19182: 8-piece Pillar Post Trim
- PP19183: 10-piece Pillar Post Trim
- PP19184: 12-piece Pillar Post Trim
- TH19180: 6-piece Rocker Panel Trim, Upper Kit
- RW19180: 2-piece Rear Window Trim
- RHE19180: 2-piece Rear Window Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB19180 License Bar, Above plate accent Trim
Which RAV4 years does LB19180 fit?
2019 through 2025, 4-door SUV.
Will it fit a RAV4 older than 2019?
No. Only 2019-2025 is listed for LB19180.
How wide is it?
The catalog doesn't list a width. See the photos or call 877-752-3811.
Do I need adhesive promoter?
The promoter note is on the TH19180 rocker kit. This bar uses 3M automotive-grade acrylic foam tape directly over the existing surface; QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
