Product Description
Ford F-150 Regular Cab 2009-2014, 6.5' Bed, No Flares: Stainless Molding Insert Kit (MI49308)
MI49308 gives a 2009 through 2014 F-150 Regular Cab with a 6.5' bed and no flares ten polished stainless strips, 1.5 inches wide, on its existing body side moldings. The row tags the Regular Cab as 2-door.
The accent trim with the same tags
AT49308 appears on this sheet with exactly the same tags: Regular Cab, 2-door, 6.5' bed, no flares. It's a 10-piece body side molding accent trim listed at 0.375, while this kit's strips are 1.5 inches. So the two have the same piece count and the same truck, but very different widths and a different part type. The catalog doesn't say how they relate on the truck or whether they're meant as alternatives. Compare the two sets of photos, and if you're choosing between them, call Quality Automotive Trims at 877-752-3811 with both numbers.
Checklist for MI49308
- Ford F-150, 2009 to 2014
- Regular Cab
- 6.5' bed
- No flares
- Body side moldings present and in good shape
Check your truck sits within 2009 to 2014, and confirm the cab, the bed length and that it has no flares. For the bed, measure along the floor from the front wall to the closed tailgate.
Specification
Ten strips at 1.5 inches wide. 26 gauge 304 stainless steel with a polished finish. Made in the USA. Mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface, which means no drilling. The MI49308 prep steps are on the Installation tab. Individual strip positions aren't listed; use the photos.
A word on flares
This kit is tagged "NO Flares." If your truck has flares fitted around the wheel openings, it falls outside this row. If you're not sure, take a photo of a wheel opening and call with MI49308 before ordering.
How to install
Pick a dry, mild day and check the Installation tab for the temperature range. Repair any cracked or lifting moldings and remove old adhesive or wax. Wash, dry and wipe with rubbing alcohol. Lay out the ten strips by the photos and write a position on each liner. Dry-fit with liners on, mark the ends with painter's tape, then peel and press firmly from end to end. Do a few strips and sight down them before starting the rest.
Rest of the sheet
Insert kit MI49301, 10 pieces at 1.5, is tagged for the Super Cab with a 5.5' bed and flares, so it's not a Regular Cab option. Accent trims AT49306 and AT49316 are 12-piece Crew Cab sets at 0.375, with and without flares. GC49308 is a 1-piece gas door cover trim. MC49307 is a 2-piece mirror cover set, top half only, and MC49310 a 4-piece full hybrid mirror cover kit with a removable piece for the turn signal cut out when applicable; those three are tagged for 2-door and 4-door pickups. Twenty-six other numbers are listed without details.
Care
Mild soap, water and a soft cloth are all polished stainless needs. Avoid steel wool and abrasive pads. Questions? 877-752-3811.
MI49308 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI49308 |
| UPC | 691821530243 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2014 Ford F-150 |
Fitment: MI49308
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2009-2014 | 2-door, Pickup Truck, Regular Cab, 6.5' Bed, NO Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2014 Ford F-150
- AT49306: 12-piece Body Side Molding Accent Trim
- AT49308: 10-piece Body Side Molding Accent Trim
- AT49316: 12-piece Body Side Molding Accent Trim
- GC49308: 1-piece Gas Door Cover Trim
- MC49307: 2-piece Mirror Cover Set
- MC49310: 4-piece Mirror Cover Set
- MI49301: 10-piece Body Molding Insert Trim Kit
- MI49303: 10-piece Body Molding Insert Trim Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI49308 Body Molding Insert Trim Kit
What does MI49308 fit?
The 2009-2014 Ford F-150 Regular Cab, 2-door, with a 6.5' bed and no flares.
Is AT49308 the same kit?
No. AT49308 is a 10-piece accent trim at 0.375 with the same tags. The catalog doesn't explain how they relate.
How many strips are there?
Ten, each 1.5 inches wide.
Do I have to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
