Product Description
MI49309: Stainless Molding Insert Kit for the 2009-2014 F-150 Regular Cab, 8' Bed, No Flares
MI49309 is tagged for the Regular Cab with the 8' bed. Its row reads Ford F-150, 2009 through 2014, 2-door, pickup truck, Regular Cab, 8' bed, NO flares, and it supplies ten strips of polished 304 stainless steel, 1.5 inches wide, for the body side moldings.
How we'd confirm it
First the year: 2009 to 2014, which both the title and row state. Then the cab, Regular Cab. Then the bed. An 8' bed is the tag, and a tape measure run along the bed floor from front wall to closed tailgate, or the build paperwork, will confirm it. Last, flares: the tag says "NO Flares," so a truck with flares needs a different listing. If you get to the end of that list with any doubt, call Quality Automotive Trims at 877-752-3811 with MI49309 and describe your truck.
What the sheet does and doesn't show
The parts shown with details on this sheet don't include another Regular Cab 8' bed item. The one insert kit with details, MI49301, is a Super Cab 5.5' bed kit with flares. The only Regular Cab part with details is AT49308, a 10-piece accent trim at 0.375 tagged for the 6.5' bed without flares, so it isn't tagged for an 8' bed. Twenty-six numbers are cross-listed without details, and their pages carry their own tags.
Strips and tape
Ten pieces, 1.5 inches wide, 26 gauge 304 stainless steel, polished, made in the USA. They mount with 3M automotive-grade acrylic foam tape directly over the existing surface; no drilling. The record doesn't say which strip goes where, so lay them out by the photos.
The install, in order
Check the moldings. Cracks, lifting ends and old adhesive need attention before anything else, because the tape needs a sound, clean surface. Wash, dry and alcohol-wipe each molding. Number the ten liners according to the photos. Dry-fit each strip with its liner on, center it, and mark the ends with painter's tape. Peel, place, and press firmly along the full length. A helper holding the far end of each strip makes the dry fit easier. Do a few strips, sight along them from the front, then do the rest. The Installation tab lists the temperature range.
Measure the molding too
All ten strips share the 1.5 inch width. A ruler across the flat face of one molding, compared with that figure and with the photos, is a quick way to confirm the strips will sit on the moldings the way the pictures show.
Gas door and mirrors
GC49308 is a 1-piece gas door cover trim. MC49307 is a 2-piece mirror cover set, top half only. MC49310 is a 4-piece full hybrid mirror cover kit with a removable piece that accommodates the turn signal cut out when applicable. All three are tagged for 2-door and 4-door pickups. Crew Cab accent trims AT49306 and AT49316 also appear.
A soft cloth dampened with mild soap keeps them clean.
MI49309 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI49309 |
| UPC | 691821360390 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2014 Ford F-150 |
Fitment: MI49309
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2009-2014 | 2-door, Pickup Truck, Regular Cab, 8' Bed, NO Flares |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2014 Ford F-150
- AT49306: 12-piece Body Side Molding Accent Trim
- AT49308: 10-piece Body Side Molding Accent Trim
- AT49316: 12-piece Body Side Molding Accent Trim
- GC49308: 1-piece Gas Door Cover Trim
- MC49307: 2-piece Mirror Cover Set
- MC49310: 4-piece Mirror Cover Set
- MI49301: 10-piece Body Molding Insert Trim Kit
- MI49303: 10-piece Body Molding Insert Trim Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI49309 Body Molding Insert Trim Kit
What does MI49309 fit?
The 2009-2014 Ford F-150 Regular Cab, 2-door, with an 8' bed and no flares.
Does it fit a truck with flares?
It's tagged "NO Flares." Call 877-752-3811 for help finding the right listing.
How many strips, and what width?
Ten strips at 1.5 inches.
Will I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What is it made from?
Polished 304 stainless steel, 26 gauge, made in the USA.
