Product Description
2009-2014 Ford F-150 Regular Cab With Flares, 6.5' Bed: 10 Stainless Molding Insert Strips (MI49310)
MI49310 is tagged for a Regular Cab F-150 that has flares. Specifically, the row reads Ford F-150, 2009 through 2014, 2-door, pickup truck, Regular Cab, 6.5' bed, "w/ Flares." The kit is ten polished 304 stainless steel molding insert strips, each 1.5 inches wide.
The closest item on this sheet by tags is AT49308, an accent trim for the Regular Cab with the same 6.5' bed, but it's tagged "NO Flares" and is a different product: ten pieces at 0.375. So for a flared Regular Cab with the 6.5' bed, this insert kit is the one tagged for your truck.
Owner questions, answered from the sheet
Does the year range match the title? Yes, 2009 to 2014 on both.
How do I confirm the bed? Measure along the bed floor from the front wall to the closed tailgate, or look at your build paperwork, and compare it with 6.5'.
What if I'm unsure about the flares? Photograph a wheel opening and call Quality Automotive Trims at 877-752-3811 with MI49310.
Where does each strip go? The sheet doesn't say. The photos show the layout, so label each liner before starting.
Materials and attachment
The strips are 26 gauge 304 stainless steel, polished, made in the USA. They mount with 3M automotive-grade acrylic foam tape and install directly over the existing surface, so you won't drill.
Install approach for a flared truck
Begin with the moldings themselves: fix anything cracked or loose and remove old adhesive or wax. Wash, dry and wipe each with rubbing alcohol. Dry-fit the strips with liners on, and give particular attention to any end that sits near a flare, keeping it clear unless the photos show it otherwise. Mark the ends with painter's tape. Peel, place and press firmly along the full length. Fit a few strips, look down them from the front corner, then do the rest. A dry, mild day is best; the Installation tab gives the temperature range.
Molding check
Each strip lays over a molding that's already on the truck. Measure the flat face of one with a ruler and compare it with 1.5 inches and the photos, and look over all of them for cracks, lifting ends and missing sections before you order.
Also on this sheet
MI49301, a 10-piece insert kit at 1.5, tagged Super Cab with a 5.5' bed and flares. AT49306 and AT49316, 12-piece Crew Cab accent trims at 0.375, with and without flares. GC49308, a 1-piece gas door cover trim. MC49307, a 2-piece mirror cover set, top half only. MC49310, a 4-piece full hybrid mirror cover kit with a removable piece for the turn signal cut out when applicable. The gas door and mirror items are tagged for 2-door and 4-door pickups. Twenty-six more are cross-listed by number only.
Keeping it looking right
Mild soap, water and a soft cloth. Keep steel wool and abrasive pads off polished stainless. Let the tape settle before the truck's first wash. Questions? 877-752-3811.
MI49310 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI49310 |
| UPC | 691821495528 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2014 Ford F-150 |
Fitment: MI49310
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2009-2014 | 2-door, Pickup Truck, Regular Cab, 6.5' Bed, w/ Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2014 Ford F-150
- AT49306: 12-piece Body Side Molding Accent Trim
- AT49308: 10-piece Body Side Molding Accent Trim
- AT49316: 12-piece Body Side Molding Accent Trim
- GC49308: 1-piece Gas Door Cover Trim
- MC49307: 2-piece Mirror Cover Set
- MC49310: 4-piece Mirror Cover Set
- MI49301: 10-piece Body Molding Insert Trim Kit
- MI49303: 10-piece Body Molding Insert Trim Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI49310 Body Molding Insert Trim Kit
What truck does MI49310 fit?
The 2009-2014 Ford F-150 Regular Cab, 2-door, with a 6.5' bed and flares.
Is AT49308 an alternative?
AT49308 is a 10-piece accent trim at 0.375 tagged for the same cab and bed but "NO Flares." It's a different product.
How many strips, and how wide?
Ten strips at 1.5 inches.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What's the material?
Polished 304 stainless steel, 26 gauge, made in the USA.
