Product Description
Stainless Molding Insert Kit for the 2009-2014 Ford F-150 Super Cab With Flares and 8' Bed (MI49313)
MI49313 is the 8' bed option for a flared Super Cab. Its row reads Ford F-150, 2009 through 2014, 4-door, pickup truck, Super Cab, 8' bed, "w/ Flares." Ten polished 304 stainless strips, each 1.5 inches wide, go on top of the truck's existing body side moldings.
Super Cab with flares: pick by bed
MI49301, shown on this sheet, is a 10-piece, 1.5 inch kit for the 2009-2014 Super Cab with flares and the 5.5' bed. MI49313 is the same piece count and width, tagged for the 8' bed. So if you have a flared Super Cab, the bed length is your deciding measurement. Run a tape measure along the bed floor from the front wall to the closed tailgate, or check the truck's build paperwork. If yours doesn't match the 8' tag, Quality Automotive Trims can help at 877-752-3811. Mention MI49313.
The kit
- Ten strips
- 1.5 inches wide
- 26 gauge 304 stainless, finished with a polish
- USA-built
- 3M automotive-grade acrylic foam tape; installs directly over the existing surface, no drilling
MI49313's prep instructions appear on the Installation tab. Which strip goes on which panel isn't on the sheet; the photos show the layout.
Check the moldings and the width
The strips go over moldings already on the truck, so those moldings need to be present, intact and similar to the ones in the photos. Measure across one molding's flat face and compare it with 1.5 inches. If a molding has been replaced or damaged, call before ordering.
Install day
Pick a dry, mild day. The Installation tab has the temperature range and the full steps. Inspect the moldings and repair anything cracked or loose; scrape off old adhesive and remove wax. Wash, dry and wipe with rubbing alcohol. Sort the strips by the photos and number the liners. Dry-fit each one with its liner on, and where an end lands near a flare, keep it clear unless the photos show otherwise. Mark the ends with painter's tape, then peel, place and press firmly along the length. Do a run of strips and sight along it before turning to the rest.
Accent trims on the sheet
Three body side molding accent trims at 0.375 appear: AT49306, 12 pieces for the Crew Cab with flares; AT49308, 10 pieces for the Regular Cab with the 6.5' bed and no flares; and AT49316, 12 pieces for the Crew Cab without flares. None is tagged Super Cab, and none is part of this kit. Two of them write the bed length in feet and inches rather than decimal feet, which we've flagged.
Mirror and gas door
GC49308 is a 1-piece gas door cover trim. MC49307 is a 2-piece mirror cover set, top half only. MC49310 is a 4-piece full hybrid mirror cover kit with a removable piece for the turn signal cut out when applicable. Twenty-six more are cross-listed by number only.
Care: mild soap, water, a soft cloth, no abrasives. Questions? 877-752-3811.
MI49313 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI49313 |
| UPC | 691821339525 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2014 Ford F-150 |
Fitment: MI49313
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2009-2014 | 4-door, Pickup Truck, Super Cab, 8' Bed, w/ Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2014 Ford F-150
- AT49306: 12-piece Body Side Molding Accent Trim
- AT49308: 10-piece Body Side Molding Accent Trim
- AT49316: 12-piece Body Side Molding Accent Trim
- GC49308: 1-piece Gas Door Cover Trim
- MC49307: 2-piece Mirror Cover Set
- MC49310: 4-piece Mirror Cover Set
- MI49301: 10-piece Body Molding Insert Trim Kit
- MI49303: 10-piece Body Molding Insert Trim Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI49313 Body Molding Insert Trim Kit
What does MI49313 fit?
The 2009-2014 Ford F-150 Super Cab, 4-door, with an 8' bed and flares.
Which kit is for the 5.5' bed?
MI49301 is the Super Cab kit with flares tagged for the 5.5' bed.
How many strips, and how wide?
Ten strips at 1.5 inches.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What material is it?
Polished 304 stainless steel, 26 gauge, made in the USA.
